Top 9 Water Cooling 12Mm Id16mm Od Fittings Black

Bitspower G1/4″ to Enhance Multi-Link Fitting for use with Bitspower Crystal Link hard tubing with 16mm outer diameter. For use with Bitspower rigid tubing only.

Model: TR-BP-BSEML16-4P

Using metric size fittings? The Bykski Acrylic tubing is crystal clear and easy to work with. Sold as a 4 pack , each stick is 750mm long giving you plenty to outfit your entire system!

Features

• Easy to Cut
• High Transparency
• Easy to Bend

Specifications

• Inner Diameter (ID): 12mm
• Outer Diameter (OD): 16mm
• Wall Thickness:2mm
• Length: 750mm
• Pack Size:4

Compatibility
• Fittings:16mm OD Rigid

Parts Included

• 4 Pieces of 750mm Acrylic  tube

Warnings

With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Acrylic Tube works with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.

Not responsible for any damage caused by or when using this product. Please use at your own risk.

InstallationPLEASE NOTE: A bending insert is meant to have a tight fit. If it is loose, the rigid tube will collapse, kink, form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience, but will become easier the more you practice.The bending insert requires some stretching and lubricating to get it in the rigid tube. Steps to success are below:1. Stretch the bending insert. Remove any excess that isn’t stretched.2. Ream the rigid tube with an RFB for best results, (or a hand reamer if that’s all you have). This will ensure a clean opening for easier insertion.3. Lubricate by applying several drops of dish soap, olive oil, or Tube Lube on the bending insert itself and then place several more drops into the rigid tube.4. Work the bending insert into the rigid tube. The more you use the insert, the easier this process will become.

XSPC compression fitting for water cooling systems with easy tool-free installation.

Model: TR-5060175585097-12P

XSPC compression fitting for water cooling systems with easy tool-free installation.

Model: TR-5060175588524-6P

Features:
1. Embedded O ring design, effectively prevent leakage.
2. Can rotate 360 degrees, so the 90? angle extender can be in precisely the direction needed.
3. Made of nickel plated brass, ensuring a long lifespan for the part.

Specifications:
Name: G1/4″ 90 Degree Angle Rotary Fitting Extender Adapter
Material: Nickel-Plated Brass
Color: Black
Size: Approx. 2.8 cm / 1.1 inch (without screw length)
Male Thread Gauge: G1/4″ (international general tooth gauge)
Female Thread Gauge: G1/4″ (international general tooth gauge)
Connector: Diameter 10 mm / G1/4″

G1/4″ to Enhance Multi-Link Fitting allows connection with Bitspower Crystal Link hard tubing. For use with Bitspower rigid tubing only.

Model: TR-BP-DWEML-4P

Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.

Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.

• Material: PETG
• Inside Diameter: 12 mm
• Outside Diameter: 16 mm (5/8”)
• Length: 100 cm *4
• Color: Transparent

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

EK-DuraClear is the most advanced liquid cooling tubing, designed and manufactured for the most demanding customers, who want to use soft tubing in their builds. The EK-DuraClear structure is formulated to enable it to perform in a wide range of closed loop cooling systems, making it the top choice for every liquid cooling enthusiast.

Our top priority during the development of this tube was the prevention of bacterial growth on the tubing wall. To eliminate this problem, EK-DuraClear has very smooth inner walls that prevent any kind of bacterial adhesion. Tested in the most extreme environments, the EK-DuraClear is guaranteed to withstand far worse conditions that would ever appear in the everyday use.

One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks. EK-DuraClear has one of the best bend ratios on the market. Doing a tight turn in your liquid cooling build has never been easier! Tighter bends without kinking will allow you to have no reduction in cooling performance whatsoever.

Unlike the matte black EK ZMT Tube, EK-DuraClear is a transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid really gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

Features:
– Highly durable
– Transparent
– UV Resistant
– Logo Free (no print on tube)
– Inner Wall resilience
– Environmentally responsible, safe and non-toxic product

Technical Specifications:
– Material: PVC
– Color: Clear, not UV-reactive (resistant to UVA & UVB)
– Length: 3 meters
– Operating temperature range: -20°C to 80°C

Dimensions:
Internal diameter (ID): 9,5 mm (3/8″)
Outer diameter (OD): 15,9 mm (5/8″)

Model: 3831109850978