Top 10 Tempreture Cooling
Finding your suitable readers for tempreture cooling is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for tempreture cooling including detail information and customer reviews. Let’s find out which is your favorite one.
565 reviews analysed
1. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Control Mode:On/Off Control,Heating and Cooling
Temperature Control Output:Max.10A,100V ~240VAC
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
2. HJ Garden XH-W3002 Mini Thermostat DC 12V 10A Digital LED Temperature Controller -50 to 110 Degree Heating/Cooling Temperature Control Switch with Waterproof Sensor Probe
3. RioRand 12V DC Digital Cooling/Heating Thermostat Temp Control -50-110 °c Temperature Controller 10A Relay with Waterproof Sensor Probe
4. Pymeter Digital Temperature Controller Heat Mat Dual Thermostat Outlet Heating Cooling for Homebrew Reptile Aquarium Greenhouse Heater
- ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
- ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
- ✓【Safe and Reliable】Support High and Low Temperature Alarm
- Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
- ✓【Enhanced Functions】Power-Off Memory
- Power-On Delay
- Temperature Calibration.
- ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
5. Pymeter Digital Temperature Controller Programmable Outlet Thermostat Heating & Cooling for brewing Fermenter Greenhouse Incubator
- This temperature controller is designed with dual power sockets, just plug & play.✔
- Dual relay, able to control both heating and cooling device at the same time, or control separately.✔
- Dual waterproof sensors, turn device on and off at desired temperature, very easy and flexible to use.✔
- Thermostat is with Celsius / Fahrenheit Read-out.✔
- High and Low Temperature Alarm, Temperature Difference Alarm, very useful to keep your Greenhouse, Aquarium and Pet safe.✔
Pymeter PY-20TT is easy to use, just plug & play, safe & reliable dual output temperature controller. It is used as over temperature protection or automatic temperature control system with various electric appliances such as equipments for home brewing, aquarium heater, pet breeding, incubation, BBQ, seedling heat mat, oven temperature control, terrestrial heat control, fermentation, accelerating germination, electric radiator, electric oven, heat mat, etc.
PY-20TT is designed with dual relay and dual output, can be used to control both heating and cooling device at the same time, it also can be used to easily control single heating or cooling device. It’s equipped with dual temperature sensors, be able to set ON and OFF point for each output.
FOR EXAMPLE: for each socket, can set power ON tempeature at 68°F, and set power OFF temperature at 86°F, or set ON temperature at 95°F, and OFF temperature at 77°F.
- Designed with dual power sockets, just plug & play;
- Dual relay, able to control both heating and cooling device at the same time, or control separately;
- Dual waterproof sensors, turn device on and off at desired temperature, very easy and flexible to use;
- Celsius or Fahrenheit Read-out;
- Dual LED display, read temperature from 2 sensors;
- High and Low Temperature Alarm;
- Temperature Difference Alarm, very useful to keep your greenhouse, aquarium and pet safe;
- Power-on delay to protect output device from excessive on/off toggling;
- Temperature Calibration;
- Settings are retained even when power off.
Temperature Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy: ±1°C / ±1°F
Input Power: 85~250VAC, 50/60Hz
Output Power: 85~250VAC, MAX 10A 1200W
6. KETOTEK Digital Temperature ControllerAC 110 220V 10A Thermostat Regulator -50~110C Heating Cooling Control Incubator Relay
7. Digital Freezer / Fridge Thermometer With Alarm and Max Min Temperature Feature
Digital freezer/fridge thermometer with max min temperature feature and high/low temperature alarm setting. Ideally suited to read temperature in a fridge or freezer or outdoor temperature and room temperature simultaneously. Magnet fixture. This item comes with battery included.
Room Temperature Range: -20 to +70C&F (switchable)
Fridge/Freezer Range: -50 to +70C&F (switchable)
Reading Update: 10 seconds
Accuracy: Indoor: -20/70°C +/-1C
Outdoor: -50/-20C +/-1.5°C & -20/70°C +/-1C
Battery: AAA x 1pc (Supplied)
Battery Life: Approx 1 year
This product is not only suitable as a fridge thermometer, It can be used to measure two separate temperatures from the same unit – which is sometimes known as an indoor outdoor thermometer.
8. Ember Temperature Control Ceramic Mug, Black
- Precise: Ember keeps your coffee or tea at the perfect temperature from the first sip to the last.
- Intuitive: Ember is elegant and simple to use. No need to turn your mug on and off. The Ember Mug enters sleep mode when empty, and wakes up when it senses movement or liquid.
- Customizable: Ember is a connected device that pairs to the Ember app, allowing you to remotely change your temperature, select an LED color, and more. Available for iOS and Android.
- Battery lasts about an hour when fully charged – use included Charging Coaster to last all day
- Made of durable stainless steel with a ceramic coating
- 10 ounce capacity
9. AC 110V-220V Digital Temperature Thermostat Controller STC-1000 Thermometer Temp Controller Relay All-Purpose Centigrade Thermostat with Sensor 2 Relays for Fermentation Refrigerator
- 2 Relays Temp Controller: No need frequently change wire between cooler and heater. You can wire 2 appliances (heater and cooler) simultaneously. Automatic control temperature at the set value to keep your work and equipment in an ideal temperature range.
- Control Value Setting: Refrigerating control output compressor delay protection and temperature calibrating. Alarm for safe when temperature exceeds limited value or when sensor error. Compressor delay time set range 1 -10minutes.
- Wide Temp Measuring Range: from -40℉ to 221.8℉/-40°C to 99.9°C. The thermometer controller can help you in chicken incubation, fermentation, seedling heat, home brewing, fridge, accelerating germination and other industrial.
- Reliable Material: The thermostat controllers’ shell are made of flame retardant ABS plastic, approved EMC anti-interference test, waterproof sensor probe can be used in moisture environment.
- Accessory & Satisfied Services: Centigrade thermostat with a temperature probe and product introduction manual, so you can easy to use it. 1 year quality guarantee. If you have any questions and please feel free to contact us. We are always here to solve problem for you.
The temperature controller can be use for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other temperature control applications.
This temp controller also can apply for chicken incubation, seedling heat, home brewing and accelerating germination.
2 relays centigrade thermostat can switch the modes between cool and heat
Flame retardant ABS plastic thermostat shell, waterproof sensor probe for safe to use
Control temperature and keep the temp at your expected by setting temperature
Refrigeration control output compressor delay protection to keep your equipment work safe
Alarm when temperature exceeds temperature limit value or sensor occurs error
Temperature calibration function to detect and display accurate temp and provide a comfortable environment
1.Temperature set vale: -40℉ to 221.8℉/-40°C to 99.9°C, default 10°C
2.Ence set value differ: 0.3 – 10°C, default 0.5°C
3.Compressor delay time: 1 – 10minutes, default 3 min
4.Temperature calibration value between: -10 to 10°C, default 0°C
Accuracy: ±1°C when measurement temperature between (-58℉ to 158℉/ -50 °C ~ 70 °C);
5.Power supply: AC 110-220V, 50/60Hz,
6.Power consumption: <>
7.Sensor: NTC sensor (1PC);
8.Relay contact capacity: Two Relay, Cool 10A/250VAC; Heat 10A/250VAC;
Front panel size: 2.95 x 1.36 inches (L*W)
Mounting size: 2.79 x 1.41 inches
Product size: 2.95 x 3.35 x 1.36 inches(Length*Depth*Width)
Sensor Length: 39.37 inches/ 1m (included the probe length)
1 x Temperature controller
1 x Temperature Sensor probe
1 x Introduction manual
Temperature controller don’t include outlet or adapter
Strictly distinguish connection of sensor and power
10. EBM papst 4656N 12038 1238 12cm 120mm AC 220V all Metal aluminium cooling server industrial fan high tempreture
Brand: Germany ebmpapstModel: 4656NSize: 119 * 119 * 38MM (iron leaf temperature)Voltage: 230VCurrent: 0.12APower: 19WSpeed: 2650RPMAirflow: 94.2CFM 160 cubic meters / hourNoise: 47DBAUse of the environment: -40 ~ 85Life span: 40,000 hoursNW: 550G
By our suggestions above, we hope that you can found Tempreture Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!