Finding your suitable readers for pump water cooling is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for pump water cooling including detail information and customer reviews. Let’s find out which is your favorite one.
551 reviews analysed
![Mavel Star 12 volt Small Mini Submersible Water Pump for Camping DIY Swamp Cooler PC Cpu Water Cooling Fountain Water Fall 63 GPH [Upgraded Version]](https://images-na.ssl-images-amazon.com/images/I/61R8OTBsmzL._SL300_.jpg)
1. Corsair Hydro X Series, XD5 RGB Pump/Reservoir Combo, RGB Lighting
Feature
- A high-performance xylem D5 PWM pump controlled via PWM TO deliver the perfect flow balance for your loop.
- Ten top-mounted RGB LEDs light up your reservoir with stunning customizable RGB lighting when combined with a Corsair lighting Node PRO or Commander Pro.
- The integrated 330Ml Reservoir puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fillport that makes filling, flushing and topping-off coolant easy.
- Included temperature sensor provides real-time coolant temperatures from inside your cooling loop.
- Rubberized mounting system reduces pump vibrations and noise, so your custom cooling loop is seen, Not Heard.
Description
The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1
2. CORSAIR Hydro X Series,XC7 RGB CPU Water Block,16 Individually addressable RGB LEDs,Software-Enabled, 115X/AM4
Feature
- The xc7’s nickel-plated copper cold plate and more than 60 high-efficiency micro-cooling fins efficiently draw heat away from your CPU, lowering temperatures and allowing for maximum overclocking.
- 16 individually addressable RGB LEDs deliver 360° of stunning customizable RGB lighting effects when combined with a Corsair lighting Node PRO or Commander Pro.
- Transparent flow chamber shows off your coolant and enhances RGB lighting.
- Add a Corsair lighting Node PRO or Commander Pro and powerful Corsair iCUE software to enable you to customize and instantly Sync RGB lighting across all your Corsair RGB products including water blocks, fans, keyboard, LED light strips and more.
- Easy and fast installation on Intel LGA 115x or AMD AM4 Sockets with included mounting screws and pre-applied thermal material.
Description
The Corsair Hydro x series XC7 RGB CPU water block combines premium construction, vivid RGB lighting and extreme cooling performance. A precision machined nickel-plated copper cold plate and more 60 high-efficiency micro-cooling fins draw the maximum amount of heat from your CPU, dropping temperatures and letting you push your clock speeds to their maximum. A transparent flow chamber shows off your coolant in all its glory, lit by 16 individually addressable RGB LEDs for 360° of customizable RGB lighting, controlled by adding a Corsair lighting Node Pro or Commander Pro. Powered by Corsair iCUE software to deliver nearly limitless lighting customization and control, the XC7 is ready to become to become the centerpiece of your custom cooling system. Tech Support # 1-888-222-4346 opt #1
3. Corsair Hydro X Series, XD3 RGB, Pump/Reservoir Combo
Feature
- A high-performance Xylem DDC PWM pump controlled via PWM delivers the perfect flow balance for your loop.
- 16 Individually addressable RGB LEDs light up the integrated reservoir with stunning customizable RGB lighting when combined with a CORSAIR iCUE Commander PRO or iCUE Lighting Node PRO.
- The XD3’s unique compact form factor fits easily inside most systems, powering even the most compact custom cooling loops.
- The integrated 180ml reservoir puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fill port that makes filling, flushing and topping-off coolant easy.
- The included temperature sensor provides real-time coolant temperatures from inside your cooling loop, enabling automatic cooling control when paired with an iCUE Commander PRO and powerful CORSAIR iCUE software.
Description
The CORSAIR Hydro X Series XD3 RGB Pump/Reservoir Combo is ready to drive even the most compact custom cooling systems. An adjustable Xylem DDC PWM pump provides powerful flow rate for multi-block loops, while an integrated 180ml reservoir ensures the XD3 fits easily into most systems. 16 Built-in RGB LEDs, when combined with a CORSAIR iCUE Lighting Controller and powerful CORSAIR iCUE software, provide vibrant customizable lighting. An included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, the XD3 RGB Pump/Reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt # 1
4. Thermaltake Pacific DIY LCS PR22 Pump/Reservoir Combo 3-Port G 1/4" Thread Tt LCS Certified Pom Pmma Cooling CL-W081-PL00BL-A
Feature
- Sturdy and durable design: featuring 6mm thick of the pipe wall, pacific pr Series can sustain the maximum pressure up to 99 psi (pounds per square inch). easily open out the top cap for cleaning.
- Driven performance: maximum discharge up to 500L/hr for efficient cooling of your components. Top cap supports rubber washers for a proper seal, including two predrilled G1/4” Ports for fittings.
- Heat-resistant acrylic Tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable. High quality acrylic (PMMA) Tube maximum working temperature: 131℉ (55℃).
- Easy and flexible application: along with two brackets connected to both ends, pacific pr Series is Solid hold inside the chassis and allows enthusiasts to build up superior water cooling
- The pacific pr Series can be installed either horizontally or vertically, making the chassis out of the ordinary!
Description
Thermaltake introduces the Pacific PR Series pump with tube reservoir set for the ultimate in custom PC water-cooling configurations. Featuring exceptional performance and unrivalled reliability, the PR22 is manufactured from High quality POM and PMMA Material to provide a crystal clear, High performance, and durable solution. By giving users ideal mounting, fitting and flow, the Pacific PR Series is the right choice for PC enthusiasts. 300ml capacity; 500 L/HR maximum flow rate. 2 Year Warranty.
5. Corsair Hydro X Series XR7 240mm Water Cooling Radiator
Feature
- Dual 120mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build.
- 54mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans.
- A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR’s performance copper water blocks.
- High-quality matte Black polyurethane coating delivers a flawless finish to match your system.
- Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case.
Description
The Corsair Hydro x series XR5 240mm water cooling radiator delivers extreme custom liquid cooling performance, with 30mm radiator thickness and 25 micron thin cooling fins maximizing heat dissipation surface area. A premium COPPER radiator core core is optimized for use alongside copper CPU and GPU water blocks, further increasing the thermal transfer rate. Intuitive extras such as integrated fan screw guides and built-in screw protection plates make it easy to install fans, without worrying about damaging the radiator. Equipped with standard G1/4″ Threads for universal compatibility and the surface area to tame even the highest-end hardware, The XR5 240mm radiator stands ready to cool even the most ambitious custom cooling loops and defeat the heat. Tech Support # 1-888-222-4346 opt #1
6. EKWB EK-Classic XRES 250 SPC PWM RGB – Plexi (incl. Pump)
Description
EK-XRES 250 SPC PWM Classic RGB – Plexi (incl. pump) is a value-oriented water cooling pump-reservoir combo. It has been designed to be an entry-class combo solution that is able to offer great hydraulic performance complemented with RGB LEDs for modern aesthetics. The combo unit comes with a 120mm fan mount holder included.
The core of the unit is the EK-SPC 60 water pump that uses only a 4-pin PWM FAN header for operation. No other additional connector is required! Full PWM support will allow you to set automatic pump speed regulation depending on your temperatures. Full performance on demand or whisper-quiet operation in idle mode! With a maximum head pressure of 2.2m (7.2ft), and a maximum flow of 250L/h and a very compact form
The EK-XRES 250 SPC PWM Classic RGB – Plexi (incl. pump) series pump-reservoir combo comes with a pre-installed anti-cyclone insert.
The main body features two G1/4“ threaded ports of which one is an inlet (in the reservoir) and one is an outlet (from the pump). The reservoir tube is made of quality acrylic material.
Pump electrical and mechanical properties:
– Motor: Electronically commuted motor
– Rated voltage: 12V DC
– Power consumption: 6W
– Maximum pressure head: 2.2m
– Maximum flow: 250 L/h
– Maximum system temperature: 50°C
– Materials: PPS-GF30, EPDM O-rings, Aluminium oxide, graphite
– Power connector: 4-Pin PWM FAN connector
– RGB connector – 4-pin 12V ( G R B )
Operational regime:
– PWM duty cycle: ~ 20-100%
– Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present
Enclosed:
– Pump reservoir combo unit
– 120mm fan hole pattern mounting frame
– Mounting mechanism and all required screws and washers
Model: 3831109817421
7. EKWB EK-XTOP Revo D5 RGB PWM Pump, Plexi (Acrylic)
Description
EK-XTOP Revo D5 RGB PWM is a high-performance liquid cooling pump. This unit offers increased hydraulic performance (up to 15 %) compared to original factory top. This pump unit has black sleeved cables and a pre-installed 4-pin 12V RGB LED strip. EK-XTOP Revo D5 RGB PWM is a high-performance liquid cooling pump, built around the market-proven Xylem D5 PWM water pump and revolutionary EK-XTOP Revo D5 pump top with an advanced vibration-reducing mounting clamp. This unit offers increased hydraulic performance (up to 15 %) compared to original factory top and it comes with a pre-installed 4-pin 12V RGB LED strip. This pump features a single inlet- (suction) and outlet port (pressure) for installation of two standard G1/4 threaded fittings/barbs. The top is made of a quality acrylic material, while the tightening nut is made from CNC machined aluminum. Mounting clamp is made from injection molded ABS. Mounting mechanism and easy-to-follow installation guide are enclosed. This pump is ideal for PC and other electronics water cooling. The D5 pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor, the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. It is rated for 50.000 hrs MTBF at 25°C ambient!
Model: 3830046995704
8. Thermaltake Pacific M240 D5 Res/Pump PETG Hard Tube Water Cooling Kit CL-W216-CU00SW-A
Feature
- W3 Water Block: 0.15mm internal fin construction, a copper base with anti-corrosive nickel plating and high-quality PMMA cover, and a universal mounting mechanism
- PR15-D5 Res/Pump Combo: Featuring exceptional performance and unrivalled reliability, the PR15-D5 is manufactured from high quality POM and PMMA material to provide a high performance solution
- R240 Radiator: Manufactured from high-quality German aluminum alloy and aerospace-grade materials, this radiator provides exceptional performance
- Ring 12 RGB Radiator Fan: 3 patented circular 256 multicolored 120mm RGB radiator fans with high-static pressure design, one smart fan controller included
- C-Pro Compression Fitting: With special four rubber O-rings leak-free design and patented structure for ultimate loop management. 8 compression fittings are included in the kit
Description
The Pacific M240 D5 Hard Tube Water Cooling Kit is an efficient, yet quality liquid cooling solution for all water-cooled gaming systems. Inside you will find a W3 CPU water block, PR15-D5 pump/reservoir combo, R240 radiator, C1000 Pure Clear coolant, 3 Ring 12 RGB fans, 8 C-Pro compression fittings, 2 adapter fittings, 4 PETG hard tubes and other accessories. 2 year warranty.
P/N: CL-W216-CU00SW-A
Dimension: 518(L) x 198 (W) x 223 (H)
Compatibility: Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2(CPU Socket)
Components Dimension
Pump & Reservoir:228.1H) x 87.4(W) x 94.2(L) mm
Radiator : 39.9 (H) x 120.7 (W) x 273 (L)
Tube Dimension: OD : 16mm , ID : 12mm , L : 500mm
Fan Spec: 1500 RPM (1000RPM with LNC)
Coolant: Pure Clear Coolant
Kit Contents
CPU Water Block
– Pacific W3 CPU Water Block x1
Pump/Reservoir
– Pacific PR15-D5 Pump/Reservoir Combo x1
Radiator
– Pacific R240 Radiator 39.9 (H) x 120.7 (W) x 273 (L) mm x1
Fittings
– Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x6
– Pacific G1/4 90 Degree Adapter – Chrome x2
Fan
– Riing 12 LED RGB 3 Pack x1
Coolant
– Thermaltake C1000 Pure Clear Coolant x1
Tube
– V-Tubler PETG Tube 16mm OD 500mm 4Pack x1
Accessory
– Silicone Insert 900mm Tt Premium Edition
– Intel and AMD Universal Backplated & Mounting Kit
– 24pin ATX Bridge Tool x1
– Thermaltake Thermal Grease x1
9. Mavel Star 12 volt Small Mini Submersible Water Pump for Camping DIY Swamp Cooler PC Cpu Water Cooling Fountain Water Fall 63 GPH [Upgraded Version]
![Mavel Star 12 volt Small Mini Submersible Water Pump for Camping DIY Swamp Cooler PC Cpu Water Cooling Fountain Water Fall 63 GPH [Upgraded Version]](https://images-na.ssl-images-amazon.com/images/I/61R8OTBsmzL._SL1030_.jpg)
Feature
- 12v dc Submersible brushless Water pump,NOT Self-priming ,design to be submerged,can be powered by 12v Ac power adapter, please Search ASIN (B0713T89R1) for the power adapter.
- For the Water fall,Water feature & Water foutain in Home & Garden – Would make a nice fountain pump for a display,Can be powered by solar pannel( need to add a constant-voltage controller yourself) , or power it by 12 Ac power adapter,please Search ASIN (B0713T89R1) for the power adapter.
- For Your Bucket Swamp Cooler – This little Pump Would work like a dream for DIY Bucket Swamp Cooler ,power it by 12 Ac power adapter,please Search ASIN (B0713T89R1) for the power adapter.
- For PC & laptop Cpu Water Cooling system – If you are looking into diy a quiet water cooling Set for your Cpu,you should never miss this pump to cool down your Cpu at average Temperature for best Performance
- For other Water circulation applications: used this to pump water for pets, evaporative cooler, to circulate R V. antifreeze, for hydroponic systems and many other applications
Description
Important Tips:
Please add a filter to avod hair or dirts being clogged with in this pumps.
if our pump does not working properly, please try to open and clean it before sending back to us,thank you very much!
Specifications:
Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140°F
Item dimension: 51mm*34mm*42.7mm
Note:
1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
10. Aramox Low Noise CPU Water Cooling Pump 3000RPM Fast Heat Dissipation Computer Pump Tank for Desktop Computer Cool System (Red)
Feature
- 800L/H flow speed makes heat dissipation highly efficient.
- 3000RPM loading speed helps dissipate high heat to a great extent.
- Plug-and-play and can be directly connected to the computer power-supply with a standard 4 pin power connector.
- 3.5 meters pump head gives a powerful heat dissipation, and integrated design of water tank and pump makes installation very convenient.
- RGB light control is allowed, which needs to be bought by yourself.
Description
Specifications:
Product type: Computer Water Pump
Rated current: 0.7A
Rated power: 8W
Pump head: 3.5 meters
Pump flow: 800L/H
Starting voltage: 7V
Voltage: 13.5V
Thread: G1/4 thread
Package size: 10 x 8 x 8 cm/ 3.94 x 3.15 x 3.15 inch
Package List:
1 x Computer Water Pump
1 x Mat
Conclusion
By our suggestions above, we hope that you can found Pump Water Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
