The Best Maytag Dishwasher Rack Clips

Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.

FIXES THE FOLLOWING SYMPTOMS:
Door latch failure.
Door won’t close.

INSTRUCTIONS:
1. Turn off the power and water supply to avoid shock.
2. Open the dishwasher door and use a phillips screw driver to remove the screws that hold the dishwasher to the cabinet.
3. Close the dishwasher door and use it to pull the dishwasher out from the counter top. You only need to pull out far enough to expose the brackets.
4. The undercounter brackets are held in by the bent tabs on the bracket that hold the bracket in place. Straighten out the tabs and slide the bracket out.
5. Slide the dishwasher brackets into the same area you removed the original brackets and bend the tabs to secure the brackets to the dishwasher.
6. Finish by carefully sliding your dishwasher back under the cabinet. Use your provided screws to screw the dishwasher bracket directly to the underside of your counter with a Phillips screwdriver.

WHAT YOU GET:
2 x Dishwasher Mounting Brackets
2 x Mounting Screws

100% CUSTOMER SATISFACTION :
Feel free to contact us if you have any questions or problems with the item

4 Pack 8268743 upper rack wheels replacement replace WP8268743 WP8268743VP AP6012252, compatible with Kenmore, KitchenAid and more dishwasher

Model No.: 8268743
Replace for part No.: WP8268743, WP8268743VP, AP6012252, PS11745459,830899, EAP11745459
Compatible with: dishwasher of KitchenAid, Estate, Amana, Inglis, Admiral, Magic Chef, Jenn-Air, Kenmore, etc.

Function:
Replace the old dishwasher upper rack wheel, repair your dishwasher in a cost-saving and efficient way.

Features:
easy to install;
Good quality and wear resistance.

When should replace the old wheel?
1. Door won’t close
2. Noisy
3. Not cleaning dishes properly
4. Door latch failure

Specification:
Material: ABS plastic
Quantity: 4 pack
Color: brown
Size: 4.6 x 1 inch/ 11.7 x 2.5 cm (L x H)

Package includes:
4 x 8268743 Dishwasher upper rack wheel

Please note:
This is not original product, the mention of any brand names and related model designation above is only for purposes of demonstrating compatibility.

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Fitment:
Whirlpool – GU2500XTPB7, GU2500XTPQ0, GU2500XTPQ1, GU2500XTPQ3, GU2500XTPQ6, GU2500XTPQ7, GU2500XTPS0, GU2500XTPS1, GU2500XTPS3, GU2500XTPS6, GU2500XTPS7, GU2500XTPT0, GU2500XTPT1, GU2500XTPT3, GU2500XTPT6, GU2500XTPT7, GU2548XTPB0, GU2548XTPQ0, GU2548XTPQ1, GU2548XTPQ3, GU2548XTPQ6, GU2548XTPQ7, GU2548XTPS0, GU2548XTPS1, GU2548XTPS3, GU2548XTPS6, GU2548XTPS7, GU2548XTPT0, GU2600XTPB0, GU2600XTPB1, GU2600XTPB3, GU2600XTPB6, GU2600XTPB7, GU2600XTPQ0, GU2600XTPQ1, GU260XTPQ3 and more.

Kenmore – 66513472K901, 66513472K902, 66513473K900, 66513473K901, 66513473K902, 66513479K900, 66513479K901, 66513479K902, 66513632K900, 66513632K901, 66513632K902, 66513632K903, 66513633K900, 66513633K901, 66513633K902, 66513633K903, 66513639K900, 66513639K901, 66513639K902, 66513639K903, 66513722K600, 66513722K601, 66513723K600, 66513723K601, 66513724K600, 66513724K601, 66513729K600, 66513729K601, 66513732K600, 66513732K601, 66513732K602, 66513732K603, 66513732K604, 66513733K600 and more.

Ikea – IDF330PAGW0, IDT830SAGS0, IDT870SAGX0, IUD7500BS0, IUD7500BS1, IUD7500BS2, IUD7555DS0, IUD7555DS1, IUD7555DS2, IUD7555DS3, IUD8010DS0, IUD8010DS1, IUD8010DS2, IUD8010DS3, IUD8500BX0, IUD8500BX1, IUD8555DX0, IUD8555DX1, IUD8555DX2, IUD8555DX3, IUD8555DX4.

Amana – ADB1700ADB2, ADB1700ADB3, ADB1700ADB4, ADB1700ADS1, ADB1700ADS2, ADB1700ADS3, ADB1700ADS4, ADB1700ADW1, ADB1700ADW2, ADB1700ADW3, ADB1700ADW4.