669 reviews analysed
1. 12V/24V/220V Aluminum PTC Heating Element, 70℃- 220℃ PTC Thermostat Heater Plate PTC Ceramic Air Heater Miniature Heating 15028.5mm(12V 70℃)
Feature
- 【 Ceramic Insulation Element 】 The ptc heating element is adopt with ceramic insulation, safe to use and can be dry heated for a long time, high reliability
- 【 Eco-friendly Aluminum Housing 】This ptc heating plate housing is made of aluminum, eco-friendly, sturdy and durable in use
- 【 Wide Application 】 100% brand new and high quality 12v ptc heating element, widely used in Air conditioning, electric heating, automobiles, air curtains, humidifiers, dryers, etc. Also used for car and electronic components preheating
- 【 Temperature Resistant Lead Wire 】 Comes with a 15cm lead wire, which is high temperature resistant. It can be easily used to heat solids and gases. Simple structure, easy to install and long service life
- 【 Warranty 】 We are here with a 100% product promise to give you the best in customer care! Please feel free to contact us if you are not satisfied with it for any reason. We promise all the issue will be solved within 24 hours
Description
WE SELLER HAS TO SAY:
Our team is doing all we can to provide good quality products in reasonable price for our loyal customers. We all try our best to implement “customer first” concept in the process of product designing, quality monitoring, price maintaining and after-sales service. As an responsible seller, we promise that 100% money refund about damaged product. If your have any product issues, please do not hesitate to contact us. Just feel free to order our product . Sincere thanks for your browsing and support!
Specification:
Material: Aluminum
Heating Material: PTC Thermistors
Heating Mode: Heat through the flow of air or direct contact with an object
Lead Material: High temperature resistance rubber wire
Wire connection mode: Connect rated voltage, regardless of positive and negative poles
Leading Wire Length: Approx. 15cm / 5.9 inch
Size: Approx. 150*28.5mm / 5.9*1.1in
Weight: Approx. 72g / 2.5 oz
Type:(Optional)
Voltage ( V )-Temperature (℃)
220V-80℃ / 220V-120℃ / 220V-220℃ / 12V-70℃ / 12V-120℃ / 12V-220℃ / 24V-70℃ / 24V-120℃ / 24V-220℃ / 36V-220℃ / 48V-220℃ / 110V-220℃
Package list:
1 * PTC Heating Plate
Note:
The power of PTC heating plate is not fixed. In a certain range, the better the heat dissipation, the greater the power.
Low voltage products not only need to meet their voltage, but also need to pay attention to the current.
If the power supply current can not meet the impact current of the product, the product will be slowly warming up, low temperature, or even short circuit.
Cannot be directly immersed in water or liquid.
2. Bestol 2pcs PTC Heating Element 50W AC DC 24V 70 Degree consistant Temperature Ceramic Thermostatic
Feature
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.
Description
Product Name :PTC Heating Element
Size(Approx.) :50×15×3.5mm
Voltage 24V AC/DC
Temperature:70 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 24V 70 Degree Celsius PTC Heater Element
3. Bestol 2pcs PTC Heating Element 50W AC DC 24V 110 Degree consistant Temperature Ceramic Thermostatic
Feature
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.Please see the following description about the power of the problem.
Description
After heating power in electricity from small to large and small, stable in the end. Stable power related to the conditions of use, the same PTC heater, different using conditions, the power may differs a few times. The faster the heat dissipation is stable; the greater the power PTC surface temperature is higher, the greater the power. We note reference value range is the power of the actual application to power because of using the environment temperature, cooling conditions and different in many aspects.
Product Name :PTC Heating Element
Size(Approx.) :50×15×3.5mm
Voltage 24V AC/DC
Temperature:110 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 24V 110 Degree Celsius PTC Heater Element
4. Hakko A1174 Heating Element 24V 60W for 807
Description
Heating Element for 807 Handpiece
5. Icstation 24V 30W Flexible Polyimide Heater Plate Adhesive PI Heating Film 45mmx100mm (Pack of 4)
Feature
- Uses polyimide as an insulator outside, and the thermo foil as an electric heating element inside. They are formated through high temperature high-pressure and heat-sealing process.
- Extremely thin, lightweight, and flexible polyimide heaters can quickly provide heat to where it is needed. Widely used in electronics manufacturing, medical devices, scientific instruments.
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability. Safe to use with stable performance.
- Equipped with self-adhesive can be fixed on the item surface easily.
- Note: Heating films can not control the temperature itself. You can use it with a temperature controller. Working Voltage: DC 24V, Power: 30W, Film Size: 100 X 45mm/3.94 X 1.77inch(L*W), Maximum Temperature: about 170℃
6. BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
Feature
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
Description
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 24V 50W Ceramic Cartridge Heater
7. Creality 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro,Prusa Mendel,Anet E10 (Pack of 5pcs)
Description
Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer, etc.
Cartridge Heater Description:
Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
The heating wire inside which is wound onto a ceramic core
The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)
Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
Package Included :
5*24V Cartridge Heater with 1m wiring
8. 50×28.5mm Air Heater,Aluminum Housing PTC Heating Element Plate Thermostatic Heater(24V 120℃)
Feature
- The PTC air heater uses a 15 cm long wire to withstand high temperatures. It can be easily used to heat solids and gases.
- Heating elements are widely used in air conditioners, electric heating, automobiles, air curtains, humidifiers, dryers, etc. Also used for preheating of automotive and electronic components.
- Ceramic insulation, safe to use, long-term dry heat, high reliability.
- The structure is simple, easy to install and has a long service life.
- The outer casing is made of aluminum and is environmentally friendly and durable.
Description
Specification:
Material: Aluminum
Heating Material: PTC Thermistors
Heating Mode: Heat through the flow of air or direct contact with an object
Lead Material: High temperature resistance rubber wire
Wire connection mode: Connect rated voltage, regardless of positive and negative poles
Leading Wire Length: Approx. 15cm / 5.9 inch
Size: Approx. 50×28.5mm / 2.0×1.1in
Weight: Approx. 26g / 0.9 oz
Type:(Optional)
Voltage ( V ) Temperature (℃)
220 80
220 120
220 230
12 70
12 120
12 220
24 70
24 120
24 220
36 220
48 220
110 220
Package list:
1 × PTC Heating Plate
Note:
The power of PTC heating plate is not fixed. In a certain range, the better the heat dissipation, the greater the power.
Low voltage products not only need to meet their voltage, but also need to pay attention to the current.
If the power supply current can not meet the impact current of the product, the product will be slowly warming up, low temperature, or even short circuit.
Cannot be directly immersed in water or liquid.
9. Bestol 2pcs PTC Heating Element 50W AC DC 12V 80 Degree consistant Temperature Ceramic Thermostatic
Feature
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.Please see the following description about the power of the problem.
Description
After heating power in electricity from small to large and small, stable in the end. Stable power related to the conditions of use, the same PTC heater, different using conditions, the power may differs a few times. The faster the heat dissipation is stable; the greater the power PTC surface temperature is higher, the greater the power. We note reference value range is the power of the actual application to power because of using the environment temperature, cooling conditions and different in many aspects.
Product Name :PTC Heating Element
Size(Approx.) :50×15×3.5mm
Voltage 12V AC/DC
Temperature:80 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 12V 80 Degree Celsius PTC Heater Element
10. Bestol 2pcs PTC Heating Element 50W AC DC 24V 220 Degree consistant Temperature Ceramic Thermostatic
Feature
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.
Description
Product Name :PTC Heating Element
Size(Approx.) :50×15×3.5mm
Voltage 24V AC/DC
Temperature:220 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 24V 220 Degree Celsius PTC Heater Element
Conclusion
By our suggestions above, we hope that you can found Heating Element 24V for you.Please don’t forget to share your experience by comment in this post. Thank you!
