Top 9 Ge 45613 Zwave

Set the scene with the GE-branded Enbrighten Z-Wave In-Wall Smart Dimmer with Quick Fit and Simple Wire. When paired with a compatible hub, the hardwired smart dimmer operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, Home Seer, Vera, Nexia and more.

Expand your control with the GE-branded Enbrighten Add-on Switch with QuickFit™ and SimpleWire™. When paired with a GE-branded smart switch or dimmer, including Z-Wave and Zigbee controls, the hardwired device completes multi-switch systems. Wirelessly operate and schedule indoor or outdoor fixtures from up to five locations for effortless management of your home.

The Z-Wave Plus 600W dimmer uses the latest generation of Leviton’s dimming technology for lighting control products. Screwless wallplate shown, but not included. Optional screwless wallplates available in several colors and sizes. It supports dimmable LED and CFL technologies up to 300 watts along with support for legacy incandescent lighting loads up to 600 watts. The DZ6HD is Z-Wave Plus certified, ensuring the latest technology, increased communication range, network wide inclusion, and over the air updates. The highly advanced design features two-way feedback, is scene capable, and is supported by security systems, hubs, and gateways that are Z-Wave enabled, providing remote access and scheduling abilities. Featuring an all new appearance, the true rocker allows users to push the top of the paddle to turn on or the bottom to turn off. Additionally, the dim/brighten bar is conveniently located along the right hand side of the paddle, ensuring ease of use with the state-of-the-art device. Vanishing leds on the left hand side of the paddle show current and target light level with real-time feedback. For the most professional and cleanest installation, pair the device with an optional Leviton screwless wall plate. DZ6HD is for use with Z-Wave enabled hubs like the Samsung SmartThings, to help facilitate a comprehensive smart home. If you do not wish to use a hub but still desire voice controls and select third-party device integration, Leviton recommends the DW6HD. If using in a HomeKit installation, utilize the DH6HD.

Transform any home into a smart home with the GE Smart Lighting Control Add-On Paddle Switch. The GE Smart Lighting Control Paddle Switch replaces your current switch, uses existing wiring and provides your home with ultimate flexibility when combined with a GE Z-Wave, ZigBee or Bluetooth In-Wall Smart Switch, Dimmer or Fan Control. The GE Smart Lighting Control Paddle Switch operates as your home automation system primary control, requiring three-way or four-way wiring configurations. Three-way wiring configuration turns the light or appliance on or off from two separate locations. Four-way wiring configuration turns the light or appliance on or off from three separate locations. With an interchangeable paddle design, the paddle switch matches most standard wall plates and home decor, and includes white and light almond paddles that will match most standard wall plates (wall plate not included). This product is ALEXA COMPATIBLE, however, it REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). **This product CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).**

Set the scene with the GE-branded Unfrighten Z-Wave Plus In-Wall 1000W Smart Dimmer. When paired with a compatible hub, the hardwired smart dimmer operates powerful home lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, Home Seer, Vera, Nexia and more.

HS-WD200+ is a Z-Wave Plus smart dimmer wall switch for use with most dimmable lighting loads. The switch includes RBG LED indicators which may be controlled wirelessly to suit color preferences or to reflect the changing status of other devices in your home. HS-WD200+ is also designed to trigger automation events with a multi-tap operation (up to 5 taps). HS-WD200+ may be used with most home controllers but should be used with HomeSeer Hometrollers for best compatibility with all features. Once installed, HS-WD200+ works like any other paddle-style switch and will turn the attached load on, off or to desired dim level. However, add it to any HomeSeer system and you’ll be able to trigger up to 14 different events! In normal mode, the LED indicators glow to reflect the on/off status of each circuit using a palette of 7 possible colors. Normal mode colors can be set once and left or can be programmed to change every day or on holidays, birthdays and other special events. For example, you can program dimmers to glow green and red on holidays In status mode, the LEDs can be controlled to reflect the status of nearly anything in the home. For example, if the front door is closed and locked, it can glow green. If the door is closed but not locked, it can glow yellow. If the door is open, it can blink red. If no status conditions are active, wall switches automatically return to normal mode. Multi-tap Triggers Press top or bottom of paddle once – turns attached load on or off and can also trigger 2 HomeSeer events Press & hold top or bottom of paddle – triggers 2 HomeSeer events Press top or bottom of paddle 2, 3, 4, or 5 times – triggers up to 8 more different HomeSeer events