The Best Digital Cooling Thermostat Controller Solar Water Heater

Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;

Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)

Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)

Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)

Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)

Package Content:
1x WH1436A Temperature controller
1x sensor cable

The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.