The Best Cooling Thermostatic Outlet
Finding your suitable readers for cooling thermostatic outlet is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for cooling thermostatic outlet including detail information and customer reviews. Let’s find out which is your favorite one.
841 reviews analysed
1. Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
2. Wireless Programmable Thermostat Plug, Hycency Automatic Heating & Cooling Outlet Thermostat Wireless Temperature Controller Built in Temp Sensor with Remote Control LCD Display (1 Pcs)
- PROGRAMMABLE THERMOSTAT: Programming the thermostat via the remote control, control distance reaches 66ft in the open area. With heating and cooling mode, thermostat allows you to program at temperature range 32-158℉(0-70℃).
- SAVE MONEY: This thermostat will help make your home not only Comfortable but energy efficient. The thermostat can save energy costs on heating or cooling. It saves energy by adjusting the temperature.
- INSTALLATION: No installation or wiring, just plug thermostat into an outlet, plug your portable heating or cooling unit into the thermostat, and you’re ready to go. You can move thermostat plug to your desired position, convenient and flexible.
- EASY TO USE: Automatic matching remote control and thermostat plug. select the heating or cooling mode via the remote control and set the target temperature. Accurate temperature control of ±1℃ for consistent comfort. Choice of ℉ or ℃ temperature display on LCD.
- SAFE AND RELIABLE: 3-Prong thermostat plug with grounded terminal, recoverable overload short circuit and maximum load current up to 15A. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater.
3. Programmable Wireless Thermostat Plug, Hycency Digital Temperature Controller Automatic Heating & Cooling Outlet Thermostat with Remote Control LCD Display, 15A/1800W (1 Pack)
- Home Programmable Thermostat: Heating and cooling mode, thermostat allows you to program at temperature range 32-158℉(0-70℃). comes with remote control, control distance reaches 66ft in the open area.
- Save energy and save money: Hycency thermostat saves energy by adjusting the temperature, will help make your home not only comfortable but energy efficient. Accurate temperature control saves energy costs on heating or cooling.
- Easy Operation: No installation or wiring, plug and play unit. Remote control and thermostat plug automatically match, and select the heating or cooling mode via the remote control and set the target temperature. Choice of ℉ or ℃ temperature display on LCD.
- Safe and widely used: Built in relay control and fuse for overload protection, maximum load current up to 15A. Hycency thermostat suitable for most heating & cooling devices, such as electric heater, infrared heater, fan heaters, tube heaters, floor heater or cooling devices etc.
- Brief design: One remote can control multiple sockets(less than 66ft). The remote control has a white backlight to display the current and target temperature, in either ℃ or ℉, standard time or summer time. Remote control is powered by 2pcs 1.5V AA batteries(Batteries are not included). Low battery warning.
Hycency is always committed to making life smarter, easier and more
comfortable. Hycency wireless thermostat consists of thermostat plug and
wireless remote control. It is used for automatic control units heating or cooling.
When the current temperature reaches the target temperature, it will
automatically turn on/off the heating unit or cooling unit. Maintain stable room
temperature and energy savings.
1. Plug and play unit, no installation required.
2. Portable design, suitable for placing or wall mounting
3. Automatic wireless connection between remote thermostat and receive switch
4. In-built temperature sensor
5. Choose between heating function and cooling function, relevant to selected appliance.
6. Multi-channel – one remote thermostat can control multiple receiver switches
7.Remote control is powered by 2pcs 1.5V AA battery (battery is not included)
8. Low battery warning: The low voltage mark will be displayed on the LCD
when the battery is lower than 2.7V
Maximum rating: 120V/15A/60Hz/1800W
Temperature range: 0℃~70℃ (32℉~158℉)
Temp＞70.0 ℃, CURRENT=HHT
Temperature resolution: ±1℃ or ±1℉
Transmission frequency: 2.4Ghz
Maximum range: 66ft in open area
What’s in the Box
1*Hycency Thermostat Outlet
1*Remote Control (battery is not included)
4. Hycency Programmable Thermostat Outlet, Heating & Cooling Plug in Thermostat (White)
- Programmable Thermostat outlet: The thermostat outlet comes with heating and cooling mode. It is programmed by the remote control and the temperature control range is 32-158℉(0-70℃). Control distance reaches 66ft in the open area. Choice of ℉ or ℃ temperature display on LCD.
- Energy Saving: This hycency thermostat outlet saves energy by reducing wasted energy in your home. it can help save energy costs on heating or cooling and make your home not only Comfortable but energy efficient.
- No need installation: Plug and play, no installation or wiring, easy to use. plug your portable heating or cooling unit into the thermostat outlet, and you’re ready to go.
- Easy Operation: Remote control and thermostat outlet automatically match, then select heating or cooling mode and set the target temperature. thermostat will play with your home device. Built-in temperature sensor for accurate reading temperature.
- APPLICATION: The thermostat plug allows control any 120 volt device up to 15 amps. It can help you control the room temperature accurately. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater,etc.
This Hycency programmable thermostat outlet is designed for
automatic control of electric heating unit or cooling unit. It consists of
2 parts: a thermostat outlet and a remote control. Backlight LCD
screen on the remote control for accurate data reading.
Temperature sensor is built in the remote control. it could
automatically detects the ambient temperature and send a signal to
the thermostat socket every 20-30 seconds. The thermostat socket
stops heating or cooling when the current temperature is equal to the
target temperature, provides comfort and energy saving.
1. Plug and play type, no need installation
2. Heating Mode and Cooling Mode switchable
3. LCD with green backlight
4. Display current temperature and target temperature
5. °C/°F switchable
6. Easy setting with memory function
7. High/Low temperature warning:
Low temperature: ≤0°C, current temperature shows LL
High temperature: ≥70°C, current temperature shows HH
8. Low battery warning: The symbol of battery is flashing when the battery voltage is lower than 2.7V
9. RF 433Mhz RF technology
10. Portable design, hold in hand/stand on table/wall mounted
Plug Type: USA Plug
Max Rating: 120V/15A/60Hz, 1800W Max
Transmission Frequency: 433.92MHz
Max. Range: 66ft in Open Area
Current Temp. Range: 0°C~70°C or 32°F~158°F
Target Temp. Range: 0°C~70°C or 32°F~158°F
Temperature Resolution: ±1°C/±1°F
Remote Control Power: 2 * AAA 1.5V Batteries (Battery is not included)
There are 2 ways to reset your mode:
1. Reinstall the battery
2. Long press the ON or OFF, and then long press ON and OFF at the same time.
1 X Thermostat Outlet
1 X Remote Control (Battery is not included)
1 X User Manual
5. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
1x ITC-308 Temperature Controller
6. Programmable Thermostat Outlet Plug for Space Heaters and A/Cs, 120v/ 110v 15 amps, Heavy Duty
- Heavy duty thermostat made for all 15 amp heaters, window units and portable A/Cs.
- With Weekday/ Weekend programming, four slots per day. Comes pre-programmed for plug and play option.
- Quality construction, FCC certification and ultra-clear instructions.
- Will retain programming in event of being unplugged or power loss! (You will have to set the clock again)
- You can set the span of temperature change from 1- 5 degrees!
Welcome To Thermaplug, Where You Program Your Comfort!
This most versatile device can be programmed to make your heater or AC turn on and off until a desired temperature is reached.You can set it to multiple temperatures for different time slots to optimize your comfort. It has a Weekday/ Weekend program, Permanent hold, Temporary hold and a Greenhouse mode. Aside from heaters and ACs it has many applications, such as greenhouses, doghouses, swamp coolers and anything else that is temperature controlled. It is designed that except for the the Date and Time, all settings are retained in the event that the device should get unplugged. Made to work only with models that automatically turn back on once power is restored.
7. Lux WIN100 Automatic Heating & Cooling 5-2 Day Programmable Outlet Thermostat, Compatible with Portable A/C, Fans, and Space Heaters
- PROGRAMMABLE: This 5-2 day thermostat allows you to program weekdays and weekends at different temperatures
- EASY TO USE: Comes with easy to use touch keys and displays the current temperature for easy reference
- INSTALLATION: No installation or wiring, easy to plug in and select the desired heat
- COMPATIBLE: Easy to use with portable space heaters, window air conditioners, and circulating fans
- SPEED DIAL: User friendly dial to set weekend, weekday, and day and time heating and cooling temperatures
Programmable outlet thermostat allows control any 120 volt device up to 15 amps. Use with a fan or air conditioner for cooling purposes. Also may be used with a space heater for heating purposes. Separate programs for heating and cooling. Setting Range 45 DegreeF to 90 DegreeF (7 DegreeC to 32 DegreeC) with DegreeF/ DegreeC selectable. Temporary temperature override and a manual hold. Adjustable temperature differential/cycle rate. Mode slide switch and a positive on/off switch. 120VAC outlet powered. 12 hour clock only. 2 G13A size 1.5V alkaline batteries included (for clock only). On-screen low battery indicator. Battery free memory storage. 5 minute short cycle protection. Time and temperature alternate in display.
Designed for use with space heaters and air conditioners that automatically restart after power reconnection, the Lux WIN100 5-2 Day Heating and Cooling Programmable Outlet Thermostat offers the comfort, convenience, and energy saving benefits of full programmability. To use, just plug the WIN100 into an outlet, plug your portable heating or cooling unit into the thermostat, and you’re ready to go.
The WIN100 can be programmed before it’s plugged into the wall.
The patented Lux Speed Dial allows for easy programming.
Create Different Programs for Weekdays and Weekends
The WIN100 allows you to enjoy the benefits of a programmable thermostat for your heating or cooling unit. This model offers the convenience of 5-2 day programming so you can create different programs for weekdays and weekends.
The WIN100 also boasts a positive on/off switch, and a heat/cool switch that allows the use of this product for two seasons: summer and winter.
Offering straight-forward operation, the WIN100 has a patented Lux Speed Dial for easy programming, a positive on/off switch for streamlined operation, and battery-free memory storage.
For added convenience, this ETL-approved thermostat can be programmed before it’s plugged into the wall. Once programmed, it operates off of a standard 120-volt wall outlet (with ground), and it comes with two 1.5-volt G13 alkaline button cell batteries for the clock.
Save Money and the Environment
Like all programmable thermostats, the WIN100 helps reduce energy consumption, but this efficient device takes savings a step further. To maximize your home’s energy efficiency, the WIN100 comes preprogrammed with default heating and cooling schedules that are designed to save up to 33% on energy costs over a year and also help cut down on your carbon footprint. Because the WIN100 is 100% mercury free, you can be sure it’s a safe and environmentally conscious choice for your home.
About Lux: Innovation, Quality, and Value
Since 1914, Lux Products Corporation has manufactured quality products for the home. It all began with turn-of-the-century timing devices, the forerunners of the now world-famous Lux 60-Minute Timers. Building on the success of these simple and utilitarian items, Lux grew into the multifaceted manufacturer and merchandiser it is today. The Lux name has always stood for innovation, quality, and value. The company’s full line of electronic and mechanical thermostats offers models for nearly every heating and cooling application. See how you can save money and conserve energy with Lux.
What’s in the Box
Lux WIN100 5-2 Day Heating and Cooling Programmable Outlet Thermostat, installation guide, instruction manual, and two 1.5 volt G13 alkaline button cell batteries.
Not sure which model is right for you?
Click here for a complete comparison LUX programmable thermostats.
8. Nashone Wireless Temperature Controller,Electric Thermostat with Remote Control Built in Temp Sensor 3 Prong Plug LCD Display Heating Cooling Mode(wirelss thermostat)
- REMOTE CONTROL.ON and OFF just need to click button. Control distance reach 40 meters with the sensor in open area and certified by FCC
- SMART TEMPERATURE MEASUREMENT. Built-in temperature sensor, ambient temperature detected automatically by remote controller, appliance stop to heat or cool after current temperature equal target temperature
- MULTIPLE SAFETY PROTECTION.3-Prong socket with grounded terminal, recoverable overload short circuit and Max load current up to 15A.Supply security alarms in unattended operation
- EASY TO READ AND INSTALL. Accurate reading for LCD display with back light. Wall mounted or table stand, user-friendly installation
- WHAT YOU WILL GET.Wireless thermostat outlet, remote control, user manual, 18 month warranty for quality-related issues and 45 days money back guarantee
9. DIGITEN Digital Thermostat Outlet Switch Simple-stage Plug Controller LCD Temperature Control 110V 15A
10. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
By our suggestions above, we hope that you can found Cooling Thermostatic Outlet for you.Please don’t forget to share your experience by comment in this post. Thank you!