649 reviews analysed
1. Vantrue 10ft Mini USB 12V-24V to 5V Dash Cam Hardwire Kit with Mini/ACS/ATO/Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Mini USB Dash Cams, GPS Navigator, Radar Detectors
Feature
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
- 【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery.
- 【Mulitiple uses】Mini USB plug compatible with all mini usb dash cams such as Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices.
2. AUKEY Dash Cam Hardwire Kit with Motion Detection Sensor, Dashboard Camera Hardwire Kit for DR01, DR02, DRA1, DR02 J, DR03 & DR02 D Dual Dash Cameras, and More
Feature
- Dash Cam Upgrade: Maintain automatic monitoring of your vehicle when it’s parked and the ignition is off. Don’t leave your car unprotected
- 360° Protection: The inline sensor detects motion within 2–3m / 6.56–9.84ft in all directions. It instantly triggers the dash camera to capture any activity, and the dash camera automatically stops recording and stands by after 2–3 minutes if no further motion is detected
- Simple Setup: No electrical wiring or tools needed to install this kit. Plugs into the OBD-II DLC port under the dash (in all cars sold within the U.S. since 1996)
- Parking Mode Compatibility: Works with AUKEY DR01, DR02, DR02 D, DR02 J, DRA1 and many other mini-B dash cameras with parking mode (motion detection recording)
- Package Contents: AUKEY PM-YY Dashboard Camera Hardwire Kit, User Manual, 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty Card
Description
Dash Cam Companion
Investing in a dash camera is a smart choice for personal protection and insurance purposes, but most dash cameras power off when the car ignition is switched off, leaving your car unprotected. The AUKEY PM-YY Dashboard Camera Hardwire Kit maintains power supply to your dash camera, solving this problem.
Constant Car Protection
The PM-YY connects your dash camera to your car’s battery so the camera can receive power and record any activity after the ignition is turned off. To minimize battery draw in parking mode (motion detection recording), the inline motion detection sensor only activates the camera if motion is detected (within 2–3m / 6.56–9.84ft), and the camera enters standby again after 2–3 minutes if no further motion is detected. The hardwire kit’s 11.6V cutoff also prevents excessive discharge.
Hassle-Free Setup
Simply plug the connectors of this cable into the OBD-II DLC port of your car’s fuse box and the mini-B port on your camera. Use the 3M adhesive pad to fasten the motion detection sensor to your car’s windshield in seconds. No fuss with fuses or wiring.
Discreet Cable Management
The 10-foot hardwiring cable fits neatly and almost unnoticed in your car, elevating your dash camera to the next level with greater integration and functionality. Also, with a car charger port freed up, you have more ports to charge your devices. This hardwire kit is a small but powerful dash camera accessory for your AUKEY DR01, DR02, DR02 D, DR02 J, and many other dash cameras with mini-B power input port and parking mode.
45-Day Money Back & 24-Month Warranty
All AUKEY products are backed by our 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty.
3. SHISHUO Dash Cam Hardwire Kit – Mini USB and Micro USB Port 3.5m Cable with LP Mini/Mini/ATO/Micro2 Fuse, 12V to 24V Input, 5V Output for Dash Cam GPS Sat-Nav with Battery Drain Protection
Feature
- 3.5m hardwire kit for dash cam or other device powered by Mini USB port and Micro USB port, 5V/1.5A steady output, voltage input supports from 12V-24V
- Comes with Low-Profile Mini, Mini, ATO (Regular), and Micro2 fuse adapter, suitable for most cars. Leads come with protective sleeve to cover the crimps
- Make parking monitor for dash cams (should the device support) available, keeps it powered even after engine off
- Battery drain protection will cut off the power once the input voltage drops to under 11.6V (23.2V for 24V input), leaving enough power to ignite the engine
- 2-year warranty from SHISHUO. Worry free aftersales customer services.
Description
SHISHUO Dash Cam Hardwire Kit – Keep your dash cam powered even after engine off!
Dash cam product’s parking monitor function will require device been hardwired to car battery, that’s the best reason why you’ll need this hardwire kit!
This hardwire kit comes with 3.5m hardwire cable with Mini USB port and adapter cable to convert to Micro USB port, providing steady 5V/1.5A output. Big voltage input ranging from 12V-24V.
4 fuse adapter available, Low-Profile Mini, Mini, ATO (Regular), and Micro2, suitable for most cars. Each lead has a protective sleeve to cover the crimp, safer and more durable.
Featured with battery drain protection, power will be cut off once the input voltage drops to under 11.6V (23.2V for 24V input), ensure there’s enough power left to ignite the engine.
Package Content
1* Hardwire cable with Mini USB port
1* Mini USB to Micro USB adapter cable
4* Different types fuse lead
4* Different types fuse adapter
1* Crowbar 15* Cable clips
4. Meknic SV-PC01 Dash Cam Hardwire Kit with Battery Drain Protection System,2A Dash Cam Hardwire Fuse Kit For Car DVR Camera Or GPS Power Supply-Installation Manual Include (Mini USB)
Feature
- ✅ Meknic Dash Cam Hardwire Fuse Kit for car DVR recorder that Use Right Elbow Angle Mini USB,24 Hour Surveillance and Protects Against Battery Dying
- ✅ No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Simply piggy backs from car fuse box socket for Meknic Car Dash Cam Hardwire Fuse Kit
- ✅ Meknic Hardwiring Kit Use a Fuse Tap or Wire Tap to Draw Power From Fuse Block Or Wire, No damage to the original circuit of the car
- ✅ Meknic Cam Hardwire kit With low voltage protection function, protect car’s battery, 12V-11.2V(Cut Off Automatically) 24V-23.2V(Cut Off Automatically) to stop your car DVR working automatically
- ✅ Warranty: The company offers one year warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy for Meknic Car Dash Cam Hardwire Fuse Kit.
5. Justech Dash Cam Hardwire Kit 10ft Mini USB/Micro USB Dash Camera Hard Wire Kits 12V-24V to 5V Low Voltage Protection with Mini/Micro/Micro2 Fuse
Feature
- Universal Dash Cam Hard Wire Kit：This hardwire kit(micro usb port) with USB micro male to USB mini female adapter cable for micro USB and mini USB dash cam,car DVR recorder ,compatible 12 – 24V vehicles
- Low Voltage Protection Function: 12V-11.6V, 24V-23.6V(Cut Off Automatically), protect car’s battery,ensure the car can start normally
- Easy to install: Simply piggy backs from car fuse box socket with little to no expertise required
- Hardwiring kit use a fuse tap or wire tap to draw power from fuse block or wire, no damage to the original circuit of the car,no need for cigarette lighter to take power
- Comes with Mini/ATS/Micro/Micro2 fuse adapter, suitable for most cars. With anti-interfere magnetic ring,enhance anti-interference capability
Description
Features：
The output port is Micro Usb Port（come with a USB micro male to USB mini female adapter cable ）
Voltage input supports from 12V-24V.
Perfect for parking surveillance, freeing up outlets in your vehicle.
Works with Nextbase and others dash cam.
Dash Cam Hardwire Fuse Kit for car DVR recorder ,24 Hour Surveillance and Protects Against Battery Dying.
No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required.
12v battery, when the voltage is lower than 11.6V will automatically power off
24v battery, when the voltage is lower than 23.6V will automatically power off
Specification:
Volt Input:12-24V
Volt output:5V
USB Interface: Mini USB(come with a USB micro male to USB mini female adapter cable )
Low voltage protection: 11.6V/23.6V
Length of Cable:About 3.2 Meter
input power: 12v to 24v
Output power: 5v 2amp
Package included:
1 x 3.2M Dash Cam Hardwire Kit
1 x USB micro male to USB mini female adapter cable
1 x ATS(standard) Fuse Cable
1 x Micro Fuse Cable
1 x Micro2 Fuse Cable
1 x Mini Fuse Cable
1 x Standard Blade Fuse
1 x Micro Blade Fuses
1 x Micro2 Blade Fuses
1 x Mini Blade Fuses
1 x Anti-Interfere Magnetic Ring(Installed with cable)
6. VIKEWE Upgraded Dash Cam Hardwire Kit with Mini/Micro USB Port, Battery Drain Protection, Anti-Interfere Magnetic Ring, 12V-24V to 5V Car Dash Camera Charger Power Cord, 5 Fuse Type & Crowbar/Cable
Feature
- ❖【Wide Compatibility & 2 Types Port】Our dash cam hardwire kit directly connects the dash camera, GPS navigator or radar detector etc to the car, bus, SUV and most car models. With 2 types port, suitable for different needs at different dash cams and car charger
- ❖【Built-in Smart Device】This hardwire kit with over-heat, over-current and low voltage protection function, it can protect your car’s battery when vehicle battery voltage was drops to 11.6V (12V input) or 23.2V (24V input), the control box will cut off the power, which leaves you with enough power to ignite the engine, and will not damage the battery
- ❖【24 Hours Surveillance】The upgrade hardwire kit connects to car battery or fuse box power, can uninterruptedly supply power for device 7*24. It can keep powered on even car turned off
- ❖【Easy Installation】No need to occupy the car cigarette lighter, just have the vehicle hardwire kit connected to car battery or fuse box power port, route the wire to the device position. Within minutes, you could finish the installation with little or no expertise required ( Installing Crowbar / Cable clips x 15 include）
- ❖【Perfect Parameter】With about 11.5ft (3.5 m) length of Cable / mini USB & micro USB port. Input voltage: 12V-24V Output: 5V/2A (Anti-Interfere Magnetic Ring included – Avoid your car radio will be interfered )
Description
VIKEWE Dash Cam Hardwire Kit – Make Connection Easier
It’s a must-have if you’re using a dash camera, GPS navigator or radar detector in your car or truck etc vehicle. The hardwire kit connects to car battery or fuse box power, can uninterruptedly supply power for device 7*24.
★Features★
1. Wide Compatibility: This dash cam hardwire kit is perfect for most type of devices and suitable for most vehicle models.
2. Low Voltage Protection: When voltage lower than 11.6 V (12V input) or 23.5 V (24V input), hardwire kit automatically cut off the power. Leaves you with enough power to start your car, and will not damage the battery
3. 24 Hours Surveillance: Our kit can uninterruptedly supply power for device 7*24. Meanwhile, no need to occupy the car cigarette lighter
4. Easy Installation: Just have the vehicle hardwire kit connected to car battery or fuse box power port.
★Specifications★
Connector: Mini USB and Micro USB Port (with adapter)
Input: 12V-24V
Output: 5V/2A
Cable Length: 11.5ft (3.5m)
★Package Contents★
Hardwire Kit for Dash Cam x1
Mini USB to Micro USB Adapter x 1
Fuse + Fuse Adapter x 5 sets
Anti-Interfere Magnetic Ring x 1
Installing Crowbar x 1
Cable clips x 15
7. Gebildet Dash Cam Hardwire Kit, Mini/Micro USB Hard Wire Kit for Dashcam, 12V-24V to 5V Car Dash Camera Charger Power Cord, ATO/ATC(ACS)/ACN Mini/ACZ Micro2 Fuse, 11.6V Real Battery Drain Protection
Feature
- 【Upgraded the 2nd Generation Dash Cam Hardwire Kit】You will get 1 x Mini USB hardwire kit,1 x installing crowbar,4 x fuse tap cable,dash cam hardwire with the most popular fuse types will meet the applications for most car models
- 【24 Hours Surveillance 】The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.6V, the regulator will cut off the power,which leaves you with enough power to start your car
- 【High Secure Standards】The mini USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against excessive current, overheating
- 【Wide Compatibility】This mini usb cable hardwire kit is suitable for most car models(Voltage between 12-24V). Our usb hardwire kit works for almost all car mini USB device, such as dash cam、mirror cam、GPS navigator and radar detector etc
- 【Worry-Free Sales Service】1 year free-replacement warranty for quality problems
Description
Specifications:
★ Connector: Mini USB
★ Input: 12V-24V
★ Output: 5V / 2A
★ Working Temperature:-40-80℃
★ Cable Length: 6.6ft (202CM)
★ Low Voltage Protection: When voltage lower than 11.6 V, automatically cut off the power
Package Contents:
★ Hardwire Kit for Dash Cam x1
★ Fuse Tap Cable x4
★ Installing crowbar x1
Warm Tips:
★ If you don’t have experience on installing the hardwire kits for the dash cam, please ask professional for help.
mini usb hardwire kit hardwire dash cam dash cam hardwire kit dashcam hardwire kit mini usb cable for dashcam hardwire dash cam usb mini usb to fuse dash cam power supply hard wire dash cam dash cam hardwire dash cam hardwire kit micro usb mini usb hardwire kit hardwire dash cam dash cam hardwire kit dashcam hardwire kit mini usb cable for dashcam hardwire dash cam usb mini usb to fuse dash cam power supply hard wire dash cam dash cam hardwire dash cam hardwire kit micro usb
8. Dash Cam Hardwire Kit, Upgrade Mini USB Hard Wire Charger Power Cord Kit with 4 Fuse Tap Cables for Dash Camera, Car DVR, GPS Navigator, Radar Detectors and More
Feature
- Hardwire Kit can be connected with the electric box of the car, and energized 24 hours after the flameout
- Connected ACC to supply the power
- With automatic detection of battery voltage and low voltage protection:when the battery voltage is getting low, It will be automatically disconnected at 11.6V to ensure that the car can start normally（23.5V for the Truck/Bus)
- Wide voltage input: output interface can be customized for all in-vehicle equipment such as recorders, air purifiers, and positioners
- Using unique imported chips, more securiety
Description
Input voltage: 12-36V
Input current: Max 1000MA
No-load output voltage range: 5.0V
Load output voltage range: 4.75-5.0V
Rated output current: 2000MAX
Rated output power: 10W.
Shell plastic material: environmental engineering plastic ABS+PC flame resistance ∪L94V-0
Wire material: environmentally friendly PVC flame resistance UL94V-0
Electronic materials: new inductors\capacitor resistance fuse IC\LED lights
Working temperature: industrial grade (-30 °C—+85*C)
Storage temperature: industrial grade ( -40 ° C – +85 ° C)
Low voltage protection description: The car is automatically powered off below 11.6V, the truck bus is automatically powered off below 23.5V, compatible with large and small cars. [Protection voltage adjustable]
9. Nilight 12V Car Add-A-Circuit Fuse Tap Adapter Mini Atm Apm Blade Fuse Holder-10 Pack, 2 Years Warranty
Feature
- Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit
- Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting
- Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box
- Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity
- Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse
Description
Plugs into occupied or vacant energized fuse block slot. Protects original circuit and provides lead for a new circuit for mini fuses include fuse 2. This high quality Add a circuit/fuse Kit allows easy installation of additional circuits without cutting or spicing. 3. Turn one fuse slot into two while providing protection for both circuits. 4. This Dual slot add-a-circuit/add-a-line/fuse plug provides a fuse slot for the existing OEM circuit and a second slot for a new circuit for a mobile electronic devices/accessories such as a mobile phone, radio, mobile accessories, etc.
10. Front and Rear Dash Cam with 32GB SD Card Included, Dash Cam Hardwire Kit for Dashcam GPS Power Supply Radar Detectors and More
Feature
- 【Car Camera Dash Cam Front and Rear】- The dual dash cam front and rear equipped with 1080P resolution front camera and rear camera.The dashboard camera built-in 6 glass lenses, F1.8 large aperture and Wide Dynamic Range, front camera captures the license plates and road signs clearly even at night, thus ensuring to get you the outstanding picture or videos. The back camera can offer you necessary reversing assistance when parking. Wide-angle camera eliminate the blind spots of your vision
- 【Loop Recording&Emergency Accident Lock】- The dash camera with night vision seamless loop recording overwrites the oldest videos with newest videos when card is full. Adjustable sensitivity G-Sensor auto detects a sudden collision/shock and immediately saves the current video and locks it to file.Preventing any overwriting and protecting your video evidence. Keep you away from driving disputes. This dash camera with night vision supports up to 32GB of micro SD card ( SD CARD included in package)
- 【Dash Cam with Parking Mode】- The dash cam front and rear built-in a battery, thus the dashboard camera for cars will automatically powers on and starts recording as soon as impact is detected, providing you favorable video evidence when your car is scratched in parking
- Through the complete 24×7 monitoring of your car, the car camera front and rear provide your car with security every moment
- ❖{Low Voltage Protection Function}❖: Equipped with sensitive voltage sensing switch, the mini usb hard wire kit will monitor the car battery voltage in real time. When vehicle battery voltage was drops to 11.4V (12V input) or 23.2V (24V input), this hardwire kit will cut the power supply, leaving enough power to ignite the engine and will not damage the battery (Anti-Interfere Magnetic Ring included)
- ❖{24 Hour Surveillance}❖: The hard wire kit for dash cam with Mini, ACS, ATO, Micro2 add a circuit fuse holders. The dash cam hardwire connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. Keeps it powered even after engine off, protect your car all day
Description
Front and Rear Dash Cam with 32GB SD Card Included, Dash Cam Hardwire Kit for Dashcam GPS Power Supply Radar Detectors and More
Conclusion
By our suggestions above, we hope that you can found Apmen Dash Cam Hard Wire Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
