Top 10 525 Cooling

EverCool Dual 5.25 in. Drive Bay to Triple 3.5 in. HDD Cooling Box

Armor converts the dual 5.25" drive bays into three 3.5" H.D.D or four 2.5" H.D.D.One 8cm fan and meshed design make the air convection better and provide a great cooling effect.The dismantle filter is easy to clean. Shock absorption design is the advantage to protect the hard disc and reduce the damage from shock.

Alphacool Repack reservoirs are built with budget in mind; simple, high quality reservoirs that get the job done right every time. With many different types of material available, like Plexi and White Delrin, there is sure to be a repack reservoir that fits your build. Repack reservoirs come with all of the stop caps needed to function properly, as well as an attractive faceplate that displays water level for easy refilling. Many users have used repack bay reservoirs for years with great results, but reservoirs are also offered in tube and other configurations. The possibilities are endless with Alphacool Repack reservoirs!

Model: 15171

OVERVIEW: This cooling unit is designed to be mounted inside your equipment cabinet or computer desk. It has a high-quality, low-noise 120mm fan, with long-lasting and quiet fluid dynamic bearings.

The system includes an adjustable thermostat, which is mounted on the inside of your cabinet. This rugged mechanical thermostat requires no maintenance or batteries to operate. It has adhesive Velcro pads on the back to make mounting and thermostat access easy.

YOU control the fan speed, using the multispeed fan controller.

THE COOLING SYSTEM INCLUDES: 1 x 120mm cabinet fan unit, 1 x adjustable thermostat, 1 x multi-speed power transformer, mounting hardware, and printed installation instructions.

SETUP:The standard system comes set up so that hot air enters the front of the fan unit (as shown with mounting plate and grills), and exits out the back. Regular Buyers: If you need to have the air coming out the front, just let us know and we will ship it that way. Prime Buyers: Since systems are shipped directly from Amazon’s warehouses, we can’t change the fan orientation on request. However, you can easily change the fan orientation later, using the simple instructions in your installation manual.

The system comes with instructions and a mounting template to facilitate installation. It comes completely assembled, with all components installed, wired and ready to go!

GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.

WARRANTY: Your purchase is also covered by a 12 month parts and labor warranty.

Take command with Thermaltake’s first-ever touch screen fan controller, the Commander FT! Monitor temperatures and fan speeds for up to (5) individual 3-pin or 4-pin fans simultaneously. The expansive 5.5″ touch screen-one of the largest available-makes interacting with it simple for auto, manual, performance, and silent operating modes to give you comprehensive control of fan cooling performance. Gain control over your systems cooling needs and give your chassis a professional look with the Commander FT by Thermaltake.

5.25″ Cooling fan mount for CPU/memory/Graphics card Heatsink bracket
Description:
metal material,Can mount 1x 12cm fan in 5.25″ postition of PC case
forming a vertical wind tunnel , through the installation of different locations , can CPU / memory / Graphics / BGA / blowing straight overall system , strengthen and improve heat dissipation.
net weigth:0.255kg
***please note:check your case space,make sure mount fan bracket.
Package include: (not included fan & no retail box)
Qty:1x Bracket with screws(not included fan)

The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use. The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt. The Eisfach is mounted in two of the front 5,25″ bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source.

Model: 15249

Rack hardness is very good, in the desktop chassis can put 5.25-inch optical drive
Converted into a 3.5-inch drive bays, 2.5-inch hard drives, SSD drive bays,
12cm fan bit; when you install a fan, it will account more than a optical drive.
Support 3.5-inch (or 2.5 inch or SSD) hard drive and a 12cm fan;
Above Install hard disk , below install the fan. Make sure the hard disk high speed read. Effectively enhance the machine speed and extend drive life.

Specifications:
Support: Solid State Drives /2.5 inch hard drive, 3.5-inch hard drive
At the same time support the installation: a 12cm fan
Material: Plastic
Size: 145 x 118 x 20mm (L x W x H)
Color: Black

Features:
3.5-inch hard disk mounting screw holes
Hard drive cooling fan mounting screw holes
Hard disk rack mounting screw holes
2.5-inch hard drives (SSDs) fixing screw holes

Package included:
1x SSD Hard Drive Adapter with screw