Nowadays, there are so many products of mk10 cooling block in the market and you are wondering to choose a best one.You have searched for mk10 cooling block in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings mk10 cooling block which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
515 reviews analysed
![[Gulfcoast Robotics] 2 PCS MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer - Made by US company with quality and precision.](https://images-na.ssl-images-amazon.com/images/I/61gakFoHsWL._SL300_.jpg)
1. All Metal Hotend with Slotted Cooling Block for Wanhao i3,0.4mm
Feature
- Applicable models: Wanhao i3,Cocoon Create 3D Printer ,Monoprice Maker Select 3D Printer v2
- Product advantage:Slotted Clamping system,no set screw to ding and damage thermal tube, significantly better heat transfer,Easier disassemble and adjustments,precise control on bore diameter
- Orifice size available:0.4mm, nozzle plated with high lubricity wear resistant coating
- Kit Includes: Wear resistant nozzle,thermal tube,slotted cooling block
- Warranty: 30 days money back or exchange,if you met problem with your kit, we will solve the problem within 24 hours, JUST MESSAGE US BEFORE LEAVING A REVIEW. We can not guarantee 0% defective rate, but we guarantee 100% satisfaction
Description
Color: silver
Packing size: 11*13*1CM
Kit weight: 36.8G
Orifice size available: 0.4mm
Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer
Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block
All metal hotend kit features:
All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.
2. Micro Swiss Cooling Block Upgrade for Wanhao i3
Description
This is redesigned cooling block for Wanhao i3 with the following improvements: Slotted Clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer (this is a big one!!!), Easier disassemble and adjustments, Tight control on bore diameter, This cooling block will work with original PTFE lined hotend, and with our Micro Swiss MK10 Allmetal Hotend kit.
3. All Metal Hotend kit with Slotted Cooling Block for Wanhao i3 /Wanhao i3 Plus and All Other i3 Clones
Feature
- Fits: Wanhao i3/Wanhao i3 Plus/Monoprice Maker Select 3D Printer v2/Monoprice Maker Select Plus/Cocoon Create 3D Printer
- Orifice size: .4mm
- Nozzle Plated with high lubricity/Precise control on bore diameter/Easier disassemble and adjustments
- Slotted Clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer
- Includes: Thermal barrier tube, Plated nozzle and Slotted cooling block
4. [Gulfcoast Robotics] 2 PCS MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer – Made by US company with quality and precision.
![[Gulfcoast Robotics] 2 PCS MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer - Made by US company with quality and precision.](https://images-na.ssl-images-amazon.com/images/I/61gakFoHsWL._SL1200_.jpg)
5. Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle
Feature
- Fits: Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Printer
- .4mm Nozzle Plated with HIGH LUBRICITY WEAR RESISTANT TwinClad XT Coating
- Kit Includes: Thermal Barrier Tube, Plated Nozzle and Slotted Cooling block
- Slotted Clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer
- Made in USA by Micro Swiss
Description
This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend
6. Micro Swiss All Metal Hotend with Slotted Cooling Block for Duplicator 6 / Monoprice Maker Ultimate 3D Printer .4mm
Description
This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On original extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.
7. Creality 3D Printer Heat Sink Radiator Fin Aluminum Cooling Block for 3D Printer CR-10S,S4,S5,Ender 3,Ender 3 Pro Series (Pack of 5)
Feature
- This heat sink radiator is compatible for 3D printer CR-10 Series and Ender-3.
- CR-10 Series include CR-10, CR-10mini, CR-10S, CR-10S4 and CR-10S5.
- Solid aluminum material for durable use.
- Light weight with high heat dissipation performance.
- Side lock screw hole, small size and easy for DIY, perfect for your 3D printer.
Description
Specifications:
Compatibility: Ender-3 / CR-10 Series(CR-10/CR-10mini/CR-10S/CR-10S4/CR-10S5)
Package included:
5 Pcs heat sink radiator
8. 4PCS Comgrow Printer Hotend Silicone Sock Heater Block Silicone Cover for Comgrow Ender 3 Ender 3 Pro Ender 5 CR-10 10S S4 S5
Feature
- This Comgrow hotend sock will greatly help to stabalize the temperature of the hotend regardless of the surrounding environment temperatures.
- Hotend Socks can be used to quickly heat the hotend to a desired temperature as the structure of the silicone inside the sock prevents heat from escaping quickly.
- This is a great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with any 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation.
- With this sock you can safely print more exotic materials such as PETG at higher temperatures while also using the cooling fans at full speed. Actively keeping the hotend very hot and cooling the PETG much quicker before it is laid onto the hotbed can help with success rates on more prints.
- Any accessories in our store have been extensively tested on all Comgrow brand products.
Description
4PCS Comgrow Printer Hotend Silicone Sock Heater Block Silicone Cover for Comgrow Ender 3 Ender 3 Pro Ender 5 CR-10 10S S4 S5
9. 3D Printer MK10 Silicone Socks, Aokin 3 Pcs MK10 Heater Block Silicone Cover for Wanhao Duplicator i3 Makerbot 2 QIDI Tech Flashforge, Black
Feature
- Compatibility: the 3D printer MK10 silicone socks only fit for MK10 heater block.
- Material: the MK10 silicone sock made of heat-resistant, non-stick silicone material.
- Please kindly note: we suggest the highest safe temperature resistance is about 230℃-250℃/ 446℉-482℉.
- Function: the silicone cover will keep your heater block clean and repel plastic of burnt, blackened and build-up, so that can extend the life of the heater block and extruder
- and helps to keep the hotend temperature stable.
- Aokin 3D printer accessories use high quality raw materials and fine workmanship, If you have any question for our product, please feel free to contact us, we will do our best for you.
Description
Specification:
Color: Black
Item Weight: 2g
Material: heat-resistant, non-stick silicone
Size: 22 x 22 x 13mm/0.78 x 0.78 x 0.51in
Safe temperature resistance: 230℃-250℃/ 446℉-482℉
Compatibility:
Fit for MK10 Extruders heater block
Package includes:
3 x Black MK10 Silicone Sock
10. FYSETC 3D Printer MK10 Silicone Socks MK10 Heater Block Silicone Cover Hotend Protection for Wanhao i3 Mini Creator 4 Pcs Blue+Black
Feature
- Compatible with Wanhao and other MK10 heater block.
- Made of a heat-resistant, non-stick silicone material our socks will repel build-up of molten plastic. This really helps with sticky materials like co-polyesters and filled-composite materials that like to build up on nozzles.
- Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print.
- The covers simply push onto the front of the HotEnd with no disassembly – they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly.
- Please kindly note: we suggest highest safe temperature resistance is about 230℃-250℃/ 446℉-482℉. Need any help please feel free to contact us, we are very happy to service you.
Description
Feature:
Size: 22 x 22 x 16 mm/ 0.8 x 0.8 x 0.6 inch
Package includes:
2 x Blue MK10 Silicone Sock
1 x Black MK10 Silicone Sock
1 x Brown extra MK10 Silicone Sock
Please Note: not includes Heater Block
Conclusion
By our suggestions above, we hope that you can found Mk10 Cooling Block for you.Please don’t forget to share your experience by comment in this post. Thank you!
