Nowadays, there are so many products of torque converter for 13 hp honda in the market and you are wondering to choose a best one.You have searched for torque converter for 13 hp honda in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings torque converter for 13 hp honda which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
959 reviews analysed
1. GO KART TORQUE CONVERTER for PREDATOR ENGINE, 6.5 HP 212CC 3/4" OHV HORIZONTAL SHAFT, ENGINE CLUTCH.75 inch, Replaces Comet TAV2 218353A, 12t 35 and 10T 40 or 41 ✮ By BULLET LINES
Feature
- unique engine bolt kit for predator engines and the correct anti vibration pilot washer.
- 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
- small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter
- A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration
- Engagement range is approximately 2350 RPM
Description
This auction is for 1 brand new complete 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine Torque Converter with all hardware necessary to mount.
Important Note: Included is the unique engine bolt kit for predator engines and the correct anti vibration pilot washer. Predator engines have a shoulder at the crank that is off by which cause the driver to rub on the back plate and misalignment of the belt; We provide extra piece of hardware to fix the problem. (no other kit on the market provides everything needed to fit a 212cc predator engine).
This kit comes with either a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
Bullet Lines torque converter is an asymmetrical inline small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter. This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments.
Our torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
Engine compatability: Predator 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine.
Specifications:
2. Jeremywell Torque Converter Go Kart Clutch kit 30 Series 3/4 inch 12T #35 Chain
Feature
- Jeremywell Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, water ski winches and much more.
- Jeremywell Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end
- Jeremywell Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A and 203814A 30-75. Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
- Jeremywell 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors
- Driver clutch bore: 3/4″(19mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley) ,Sprocket teeth: 12 teeth #35 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jack shaft with sprocket, and all mounting hardware.
3. MOOSUN 30 Series Torque Converter Driver Clutch 3/4" Bore Go Kart for Comet 219552 5957
Feature
- This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4″ Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.
- Replacement for Go Karts 30 series Engine Comet Manco, 3/4″ bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP
- Featuring 6″ diameter with 3/4″ Bore, 3/16″ Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one.
- This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load.
- Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car.
Description
This is a brand new aftermarket asymmetrical 30 series complete driver clutch with 3/4" ID hole,Widely used on go karts, bikes, lawn mowers and any more with 3/4" shaft.
Specifications:
1. Material: Iron
2. Replace: Manco 5957, Comet 203814 / 219552 / 219457, Yerf Dog Q43201W
3. Centrifugal Clutch: 3/4" Bore
4. Drive clutch bore:3/4 inches (19.05mm)
5. Key way:3/16"
6. Belt: Asymmetrical belt
7. Recommended engine:2HP-8HP
8. Fits engines with 3/4" shaft
9. 30 Series Torque Converter Driver Clutch, 6" diameter with 3/4" Bore
10. Uses a 3/4" Asymetrical Belt (Not Included)
11. Easy to install
Attention:
1. Torque converter drive pulley must be bolted tightly to the engine crankshaft. Recommended engine power 3hp to 8hp.
2. 2 1/2° angle (flat side) of belt must be against the 2 1/2° angle pulley flange(Next to engine).
4. MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4" Bore 10T #40/41/420 China (Complete 3/4" Torque Converter Set)
Feature
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft.
- Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
- Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 10 teeth for #40/41/420 chain
- This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.
Description
TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
Engine compatability: compatible on most engine with horizontal shaft.
Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan
Specifications:
Driver Clutch Bore: 3/4"
Driven Clutch Bore: 16mm
Driven Clutch Dia: 157mm or 6"
Sprocket: 10 teeth for #40/41/420 chain
Belt: Asymmetrical type
Belt Top Width: 19mm(3/4")
Engagement Speed: 2200±200 RPM
Recommended Engine: 2HP – 8HP engines, 3/4" shaft with flat key
Fits all engines with a 3/4" Straight Crankshaft.
This Kit Includes:
1x Drive belt
1x Driver pulley
1x Driven pulley 16mm bore 6" diameter
1x Plastic cover
1x Full mounting hardware kit
1x 10 Teeth sprocket for #40/41/420 chain(chain not included)
1x Aluminum mounting backplate
This kit has everything you will need!!
Please see pictures for all that is included.
5. Auto Express Go Kart 1" Torque Converter Kit CVT Clutch Comet TAV2 Manco 10T 40/41 12T #35
Feature
- Complete 1″ Inch Torque Converter Set
- This Kit Includes: 1 x Drive Belt, 1 x Plastic Cover, 1 x 1″ Driver Pulley, 1 5/8″ Driven Pulley, 1 x Aluminum Mounting Plate, 1 x 12 Tooth Sprocket for #35 Chain, 1x 10 Tooth #40/41 Sprocket, 1 x Mounting Hardware Kit
- Includes Two Sprockets
- 1x 10 Tooth #40/41
- 1x 12 Tooth #35
- 1 Year Warranty
Description
This is a high quality, complete torque converter kit for go karts and custom applications. This will replace both Comet and Manco parts.
That kit includes:
1 x Drive Belt
1 x Plastic Cover
1 x 1″ Driver Pulley
1 x 5/8″ Driven Pulley
1 x Aluminum Mounting Plate
1 x 12 Tooth Sprocket for #35 Chain
1x 10 Tooth #40/41 Sprocket
1 x Mounting Hardware Kit
6. 40 Series Torque Converter Kit Clutch Pulley 1" Driver 5/8" Driven 8 to16HP Belt replaces Comet 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and Manco 2432
Description
40 series torque converter driven clutch is a symmetrical in line small engine clutch that replaces 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and 2432. Our clutch works with 8 – 18 hp engines within the 1600 – 3300 RPM range.
Includes:
1 x 1″ Driver Clutch.
1 x 5/8″ Driven Clutch
and Belt
REPLACES COMET 40 SERIES TORQ-A-VERTER
CAN BE USED ON ENGINES WITH 8-18HP
ENGAGEMENT RANGE 1600- 3300 RPM
REPLACES:
COMET 209133A, 209133, 209139A, 209139, 209151A, 209151
MANCO 2432
No Instructions Included
7. Mophorn Torque Converter Comet Clutch Go Kart Clutch 1Inch Replaces Comet TAV2 Manco 10T 40 or 41 and 12T 35 Chain Drive Belt 1Inch
Feature
- 【QUALITY MATERIAL】 – This go-kart torque converter is made of high-quality iron and aluminum materials, lightweight, sturdy and durable
- it can reduce the engine load and get more power.
- 【IMPORTANT PARAMETERS】 – This kart torque converter has a 5/8″ driven clutch with an inner diameter of 6″ and is suitable for all engines with 1″ straight crankshafts.
- 【COMPLETE ACCESSORIES】 – This torque converter clutch includes a 1″ drive clutch and a 5/8″ drive clutch, a 12″ tooth sprocket for # 35 chain, a 10″ tooth sprocket for # 40/41 chain.
- 【UNIT REPLACES】 – This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.
- 【HIGH ADAPTABILITY】 – This go-kart torque converter is fully compatible with Comet and TAV2 torque converters, widely used in riding lawnmowers, small tractors, karts, miniature bicycles, miniature choppers, all-terrain Cars, motorcycles, and water skies.
8. BLAST LED – GO Kart Torque Converter Clutch 3/4" #40#41 420 and #35 TAV2 30-75 218353A 208352A 10T #40/41 and 12T #35 Replacement for Honda GX160 GX200
Feature
- Complete 3/4″ Torque Converter Set
- High Quality Kit Includes: 1 x Drive Belt, 1 x Plastic Cover, 1 x 3/4″ Driver Pulley, 1 5/8″ Driven Pulley (6″ Diameter), 1 x Aluminum Mounting Plate, 1 x 12 Tooth Sprocket for #35 Chain, 1 X 10T Sprocket for #40/41 Chain, 1 x Mounting Hardware Kit
- Professional Installation recommended – Terrain/Sand usage might require moving the RED Spring to different location on Driven Pulley Clutch
- Fits Honda GX160 GX120 – 4 Mounting Bolts , 1 Crankshaft bolt, 5 lock washers included
Description
BLAST LED Kit has been configure to fit Honda GX160 & GX200 OHV Horizontal Gas Engine.
Includes: GX160 GX200 requires “4 Mounting Bolts & Lock washers”, “1 Crankshaft bolt & lock washer” (a $15 value) (NO Trip to hardware store) and both sprockets #35 12T and #40/41 10T (a $12.99 value).
BLAST LED Kit included both sprocket 10T #40/14 and 12T #35
This is a high quality, complete torque converter kit for go karts and custom applications. This will replace both Comet and Manco parts.>/p>
That kit includes:
1 x Drive Belt
1 x Plastic Cover
1 x 3/4″ Driver Pulley
1 5/8″ Driven Pulley (6″ Diameter)
1 x Aluminum Mounting Plate
1 x 12 Tooth Sprocket for #35 Chain AND 1 x 10 Tooth Sprocket for #40/41 or 420 Chain
Mounting Hardware Kit
9. Torque Converter Go Kart Clutch Set Compatible for 30 Series Manco Comet TAV2 3/4" Bore 10T #40#41#420 Chain Mini Bike Engine Kit
Feature
- Package Included: 1 x 3/4″ Driver clutch bore, 1 x Overall Diameter 6″ (5/8″ driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate. (As Pictures Shown)
- Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. 3/4″shaft with flat key
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM
- however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments
- Replace Part Number: Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75
Description
Ameetaa’s go kart torque converter clutch is a replacement kits for the Comet TAV2 go-kart 30 series. This kit comes with jackshaft sprockets for the 10T #40/41/420 chain. It is made of high quality iron and aluminum, which is sturdy and durable.With this clutch,it can help you get more power out of your small engine by reducing engine load and allows higher speeds out of your small engine,smoother acceleration.
Specifications:
– Material: Iron & Aluminum
– Package Dimensions: (13.78 x 13.78 x 7.48)” / (35 x 35 x 19)cm (L x W x H)
– Weight: 11.24 lbs / 5.1 kg
– Fits: All engines with a 3/4 inch straight crankshaft
– Sprocket teeth: 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included)
– Fitment: Go Karts 30 Series
– Replacement:Comet, Predator, Manco and more
– Front Drive Clutch Bore: 3/4″(19mm)
– Rear Drive Clutch Bore: Overall Diameter 6″ (5/8″ driven pulley)
– Features:Durable, Maximum torque, Wear-resisting, Fast heat dissipation
Package Includes:
1 x Drive belt
1 x 3/4″ Driver pulley
1 x 5/8″ Driven pulley 6″ diameter
1 x Plastic Assy Cover
1 x Full Mounting hardware Kit
1 x 10 Tooth Sprocket for #40 #41 #420 chain (Chain not included)
1 x Aluminum Mounting Bracket Plate
10. 40 Series Torque Converter Kit Clutch Pulley 1" Driver 7/8" Driven 8 to 16HP Belt replaces Comet 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and Manco 2432
Description
40 series torque converter driven clutch is a symmetrical in line small engine clutch that replaces 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and 2432. Our clutch works with 8 – 18 hp engines within the 1600 – 3300 RPM range.
Includes:
1 x 1″ Driver Clutch.
1 x 7/8″ Driven Clutch
and Belt
REPLACES COMET 40 SERIES TORQ-A-VERTER
CAN BE USED ON ENGINES WITH 8-18HP
ENGAGEMENT RANGE 1600- 3300 RPM
REPLACES:
COMET 209133A, 209133, 209139A, 209139, 209151A, 209151
MANCO 2432
No Instructions Included
Conclusion
By our suggestions above, we hope that you can found Torque Converter For 13 Hp Honda for you.Please don’t forget to share your experience by comment in this post. Thank you!
