Top 10 36M Long Range Wireless Antenna

Proxicast’s small, light-weight, easy-to-install permanent mount omni-directional antenna improves transmit and receive signals for all 3G and 4G/LTE, xLTE, AWS frequencies on Verizon, AT&T, Sprint, T-Mobile, US Cellular, Bell, Rogers, Telus, Telcel, Movistar, Digicel and many other cellular operators worldwide.

This antenna is also suitable for unlicensed 900 MHz (ISM) radio applications and 2.4 GHz WiFi / ISM band and GPS use.

The omni-directional design provides high gain without the cellular tower location and alignment hassles of directional antennas.

Its compact size and white finish blend into any environment and make it ideal for many outdoor applications, including building rooftops, utility poles, surveillance trailers, well sites, remote telemetry units, meters, homes and offices.

With the appropriate adapter cable (not included), this antenna is compatible with USB cellular modems and Mi-Fi Hotspots, external 3G/4G cellular modems, routers and signal amplifiers from companies such as CalAmp, Cisco, Cradlepoint, Digi, MoFi, Netgear, Novatel, Pepwave, Proxicast, Sierra Wireless, SureCall, weBoost/Wilson and ZTE.

Specifications
Freq. Range: 695 – 4800 MHz
Gain: 10 dBi
Radiation: Omni
Polarization: Vertical
Impedance: 50 ohms
Connector: N Female – integrated bottom feed
Material: Fiberglass & Steel – White UV stable ABS radome
Height: 8.7 in (22 cm) – with bracket 10.6 in (27 cm)
Mount: Pole/wall (bracket and U-bolt for 1.25″ ~ 2.0″ dia masts included)

Requires a direct wired connection to an existing modem, router, amplifier/booster.

WILL NOT boost reception of cell phones – they require a powered booster/amplifier.

Is this compatible with my device? — Email Proxicast to check before ordering.

Note: Use our XBOOM cross-over bracket (ASIN B079WTQ4CM) to install 2 identical antennas separated by at least 22 inches for best LTE MIMO results.

MFJ-1778 – G5RV Wire Antenna – Multi-Band center-fed dipole antennas. These are multi-band, center-fed dipole antenna capable of 1,500 watts. Designed as 3/2 wavelength antennas for 14 MHz, they provide reasonable performance on many other bands. They cover all bands from 80-10 meters with a wide range antenna tuner. They are 102 ft. long and are designed to be used as an inverted vee or sloper to be more compact. Specifications: Assembled Wire Antenna: Yes Wire Antenna Type: Multi-band, non-resonant Antenna Power Rating: 1,500 Watts Wire Antenna Length: 102.00 ft. Antenna Tuner Required: Yes Feedline Connection Type: UHF female, SO-239 Minimum Recommended Feedpoint Height: 35.00 ft. Wire Gauge: 14-gauge Center Insulator Maximum Rope Size: 0.375 in. Wire Antenna Weight: 2.90 lbs.

Yagi Antenna Wide Band 806-960/1710-2500 MHz H-POL or V-POL, 0. 8-2. 5GHz Yagi antenna 9dBi outdoor, two types of connectors, RP-SMA-M and TS9 Connector with cable 2 feet Electrical Data: Frequency: 806-960/1710-2500 MHz Gain: 9 dBi VSWR: Polarization: Horizontal or Vertical Horizontal Beam width: 65° Vertical Beam width: 55° Mechanical Data: Connector: SMA-M Dimensions: 11. 81*8. 27*2. 56 in Weight: 1. 76 lb. Cable Length: 2ft Radom Material: Weatherproof ABS Mounting Method: Mast Size &Slash; 40-&Slash; 50mm (not included) Wide Band Yagi Antenna is ideal for Distributed Antenna Systems and it is used to distribute Cellular and Wi-Fi signals throughout a building or area. The broadband characteristics of the antenna enable it to operate over a very wide frequency. This antenna features 9 dBi of gain and a 55 degree vertical beam width. It is supplied with a tilt and swivel mast mount kit. The main benefit of this wideband Yagi antenna is its ability to focus its signal in one direction leading to the greater gain figures. This antenna is designed for use on stationary objects such as buildings or houses. Yagi Cell Antenna TP514 is a roof antenna and in most cases can not be attached directly to the device (Wi-Fi router, signal booster, etc. ) without some type of cable converter/adapter. This is the directional antenna and you will need to know the direction of your source signal. Also, you can put amp of some kind or signal booster between device and antenna. Please check your cellular provider frequency to be sure that antenna range will cover that frequency. The antenna does not come with mast pole mount; it comes with two U-bolts which can be used with the attached plate for pole mounting. Collect the cell tower signal and send it through the cable to an amplifier, cell phone or cellular data card. When the cell phone or cellular data card transmits, the signal is transferred to an amplifier or directly to the antenna and broadcast back to the cell tower. The main benefit of this wideband Yagi antenna is its ability to focus its signal in one direction leading to the greater gain figures. This antenna is designed for use on stationary objects such as buildings. This unique multi-band directional antenna covers the spectrum from 806 MHz and 1. 7 GHz and can be used for cellular frequencies including North American standard 850 and 1900 MHz bands, Euro/Asian standard 900 and 1800 MHz bands

Multi-band center-fed dipole antenna capable of 1500 Watts. It consists of 52 feet flat-top fed with 17 feet of 450 Ohm matching section ending in an SO-239 coax connector.

WiFi Panel Antenna is the most popular type of directional antenna in use today.
Our outdoor flat panel is commercial made tough at 14dBi gain.
This antenna is directional and must be pointed in the direction in which the signal is coming from.

The Panel antenna is used to direct the WiFi beam. It will increase the signal/reception in the direction it's pointing.
Wireless Panel is ideally suited for directional and multipoint 2.4 MHz band applications.

Specifications:

• Model: P414144
• Frequency Range: 2400-2500 MHz
• Bandwidth: 300 MHz
• Gain: 14dBi
• VSWR: ≤ 1.5
• Horizontal Beam width: 35°
• Vertical Beam width: 32°
• F/B: 17dB
• Impedance: 50Ω
• Polarization: Vertical
• Max Power: 50W
• Connector: RP-SMA (Male)
• Working Temperature: -40ºF – 140ºF
• Mounting Mast Type: U Shape
• Bracket: L Gimbal Clamp
• Color: White
• Weight: 15.2 Oz
• Dimensions: 7.5" x 7.5" x 1.5"
• Included Adapter: RP-SMA (Female) – SMA (Male)

The ANT-100 coil whip magnetic mount antenna provides superior range and reception. It features a magnetic mount, for fast and easy attachment to magnet friendly surfaces, which also mounts to your vehicle for mobile application and connects to your CL-100 and other compatible device. Improves Range & Reception. Magnetic Mount. Mobile Application. Black Steel 14.5″ Coil Whip . 6.5′ Coax Cable with Inline 3.5 mm RCA Connector. 1 Year Warranty

From the manufacturer 2DBI DUAL BAND OMNI-DIRECTIONAL ANTENNAS (3-PACK) The NETGEAR high-quality dual-band antennas operate in the 2.4 and 5 GHz bands with 2dBi omni-directional operation to provide balanced coverage throughout the home when used with supported NETGEAR routers. Use these fine-tuned antennas as a replacement for damaged WiFi router antennas – that come standard with your router. Recommended to replace all antennas. High-quality 2dBi dual band Omni-directional antennas, ideal for NETGEAR routers NETGEAR Original accessories are made by NETGEAR, and fully tested under strict SQA environment to meet the highest product quality standard Tool-free installation/ PR-SMA female Connector works with wide range of the wireless equipment Better Coverage with Omni directional Antennas Balanced and more coverage with these omni-directional antennas as compared to directional antennas which result in lesser coverage and more WiFi dead zones throughout the house. Model:NETGEAR Original Antenna The NETGEAR 2dBi dual Band antennas operate in the 2.4 and 5 GHz bands with 2dBi omni-directional operation to provide best-in-class balanced coverage throughout the home when used with supported NETGEAR routers. No positioning is required for optimal performance, since these Omni-directional antennas can send and receive Wi-Fi in all directions. Pr-sma connectors are compatible with many NETGEAR models. Use these fine-tuned antennas as a replacement for damaged Wi-Fi router antennas that come standard with your router. Recommended to replace all three (or two as on your original router).