Finding your suitable readers for 12v dc brushless blower cooling fan 50x50x15mm is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 12v dc brushless blower cooling fan 50x50x15mm including detail information and customer reviews. Let’s find out which is your favorite one.
542 reviews analysed
1. 2pack 50mm x 15mm 5015 12V Dual Ball Bearing DC Brushless Cooling Blower Fan BB5015H12 with 2 Pin Terminal UL TUV
Feature
- Package Content : 2 x DC Brushless Cooling Fan
- Bearing Type: Dual Ball Bearing, Speed: 6000 RPM, Air Flow : 3.87 CFM
- Rated Voltage: DC 12V, Current: 0.23A (0.35 Max.)
- Connector: 2 Terminal Connector with 2pin-ph2.5
- Advantage: Long Life (50000 hours) at 40 degree and Low Noise
- UL TUV approved certification. Warranty: 1 year and lifetime technical support.
Description
Description:
Model: BB5015H12
Name: 12V DC BRUSHLESS FAN
Rated Voltage : 12V DC
Operation Voltage: DC 5-13.2V
Consuming Current : 0.23A(0.35A Max.)
Consuming Power: 2.7W(4.2 Max.)
Connector: 2pin-ph2.5
Rated Speed: 6000 R.P.M.
Max. Air Flow: 3.87CFM
Iife Expectance: 50,000 hours at 40 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 16.0dB***
DC Line Length : 120mm
Rotation Direction: Clounter-clockwise
Size:50x50x15mm
Size:20g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
2. 4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)
Feature
- ✹✹ Power Connection: 2 Pin-ph2.5
- Low noise while cooling the hot end of heatsinks.
- ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
- ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
- ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
- ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!).
3. AiTrip 2Pcs 12V DC Brushless Blower Cooling Fan 50x50x15mm Fans for Computer Fan Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement
Feature
- Power Connection: 2 Pin-ph2.5
- Low noise while cooling the hot end of heatsinks.
- Low noise while cooling the hot end of heatsinks.
- Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
- Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A
Description
Cooling Blower Fans; DC 12V 0.18A 50mmx15mm Widely used in the humidifier, aromatherapy and other small appliances series; a small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; PC CPU server cooling dissipation and so on.
Repair Replacement (2 Pack)
Continuously run 10,000 hours under normal temperature.
Speed: 6500 ± 10% RPM Rated
Power: DC 12V 0.18A;
Connector: 2 Terminals Power Connector Improve air flow, cool your CPU when in use, easy thermal heat dissipation, low noise, 2-Terminals power connector, easy to install.
This product of our company is the non-waterproof product, it is strictly prohibited using in the water. Secondly, product operating voltage is DC 12V, prohibit overload use. product working environment is below zero10 Degrees Celsius to 70 Degrees Celsius Fourthly, please do not dismantle the product privately.
4. MakerHawk 2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer
Feature
- Hydraulic bearings are based on oil-impregnated bearings. Hydraulic bearings have a larger oil storage space than oil-impregnated bearings and have a unique loop-back oil supply circuit.
- Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you.
- Rated Voltage: DC 12V, Current: 0.08A
- Speed: 7200RPM, Noise: 22dBA
- Air Flow: 2.8CFM。 Dimensions: 40 x 40 x 10mm(1.6 x 1.6 x 0.36inch)
- Connector: 2 Terminal Connector with 2pin-ph2.54
- Wiring: red wire is connected to positive pole, black wire is connected to negative pole
- We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Please click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!
Description
Hydraulic fan is the fan between oil-bearing fan and ball bearing fan. It is cheap but with long life and the advantages of ultra-quiet fan. In a word, it is a highly cost-effective product.
Specification:
Model: 4010 Blower Fun
Rated Voltage: DC12V
Operation Voltage: DC7V – 12V
Consuming Current: 0.08A+5%
Consuming Power: 0.96W
Max. Air Flow: 2.8CFM
Acoustic Noise: 22dBA
Rated Speed: 7200±5%RPM
Connector: 2pin-ph2.54
DC Line Length: 300mm
Rotation Direction: Clounter-clockwise
Life Expectance: 50,000 hours at 25 degree
Size: 40x40x10mm
Screw Hole Diameter: 1.5mm
Features:
1. Hydraulic bearings are based on oil-impregnated bearings. Hydraulic bearings have a larger oil storage space than oil-impregnated bearings and have a unique loop-back oil supply circuit.
2. Improve life
3. Lubricating
4. Not easy to make noise
Polarity Protection:
1. When Vcc is reversely connected to GND, it does not conduct.(Open circuit when Vcc andamp; GND are exchanged)
2. When Vcc is reversely connected to GND, 5 seconds pull out will not burn the board.
Package Including
2 * 4010 12V 0.08A Brushless DC Cooling Fan
5. WINSINN 50mm Blower Fan 12V 5015 50x15mm Turbine Turbo Brushless Cooling for DIY 3D Printer Extruder Hotend MK2 MK3 MK7 MK8 (Pack of 4Pcs)
Description
►Oil bearings 5015 Blower Fan – High Speed version
►Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
►Size: 50x50x15mm
►Rated voltage: DC 12V
►Line length: about 1.18in / 30mm
—————————————————————————————————————
Package include:
►4 x High Speed 5015 12V Blower Fan
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
6. UTUO Brushless Radial Blower Dual Ball Bearing High Speed 12V DC Centrifugal Fan with XH-2.5 Plug 120mm by 120mm by 32mm (4.72×4.72×1.26 inch)
Description
BASICAL INFORMATION
- Dimension: 120x120x32mm
- Screw Hole Spacing: 104.5 mm±0.5
- Weight: 202g
- Connector: XH2.5-2P
- Cable Length: 20cm (8 inches)
- Noise: 61.30 dB-A
AIR FLOW-AIR PRESSURE CHARACTERISTIC
Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed.
- Max. Air Flow: 42.45CFM
- Max. Static Pressure: 41.10mm-H2O
RATED AND OPERATING CONDITLONS
- Rated voltage(VDC): 12V
- Rated current(A): 0.95A
- Rated input power(W): 11.4W
- Rated Speed(RPM/Min): 2800±10％
- Startup voltage(VDC): 7V
- Operating voltage(VDC): 7.0-14.0V
- Operating temperature(℃): -10℃-+70℃
STRUCTURE AND FORM
- Bearing: Dual Ball Bearing
- Structure: Cross flow fan
- Housing: PBT+GF30%
- Blade: PBT+GF15%
ELECTRICAL PROTECTION
- Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec.
- Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won’t be burned within 5 sec. when Vcc &GND are exchanged.
- Insulation Resistance: At least 10MΩ at 500 VDC between Housing and Both Lead Wires.
- Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires
UTUO-USPTO# 86955715 – is a registered trademark protected by US Trademark Law. JUTUONIX products are sold by authorized sellers only.
7. Antrader 12V DC Dual Ball Bearing Brushless Radial Blower Cooling Fan 50x50x15mm for DIY 3D Printer Extruder Humidifier 2" x 2" x 0.55" Pack of 3
Feature
- High quality mini brushless 5015 DC 12V fan, sleeve-bearing design cooling cooler.
- Plastic construction fan. Dual Ball Bearing
- Speed: 6000 RPM
- Air Flow : 3.87 CFM
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A
- 50 x 50 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5
- Compact motor design for computer case 50mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on.
Description
The Best Product to Save Your Time and Money!
Specifications:
Model: 5015
Name: 12V DC BRUSHLESS FAN
Rated Voltage : DC12V
Operation Voltage: DC 5-13.2V
Consuming Current : 0.23A(0.35A Max.)
Consuming Power: 2.7W(4.2 Max.)
Connector: 2pin-ph2.5 Rated
Rated Speed: 6000 R.P.M.
Max. Air Flow: 3.87CFM
Iife Expectance: 50,000 hours at 40 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 16.0dB***
DC Line Length : 120mm
Rotation Direction: Clounter-clockwise
Size: 50x50x15mm/ 2″ x 2″ x 0.55″
Weight: 78g
Package Content:
3pcs x DC Brushless Cooling Fan
Note:
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.
QUALITY GUARANTEE: If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem.
8. 2packs 50mm x 50mm x 20mm 5020 12V 0.30A Ball Bearing Brushless DC Cooling Fan 2pin AB5020H12 UL TUV
Feature
- Rated Voltage: DC 12V, current: 0.3A
- Bearing Type: Dual Ball Bearing, Speed: 6500 RPM, Air Flow : 18.7 CFM
- Connector: 2 Terminal Connector with 2pin-ph2.5
- Advantage: Long Life (70000 hours) and High Rotation Rrecition.
- Certification:UL TUV approved certification.
- Warranty: Two years, Package Content : 2 x DC Brushless Cooling Fan
Description
Description:
Model: AB5020H12
Name: DC12V BRUSHLESS FAN
Rated Voltage : 12V DC
Operation Voltage: DC 10.8-13.2V
Consuming Current : 0.13A(0.25A Max.)
Consuming Power: 1.6W(3.0 Max.)
Connector: 2pin-ph2.5
Rated Speed: 6500 R.P.M.
Max. Air Flow: 18.7CFM
Iife Expectance: 70,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 39.0dB***
DC Line Length : 120mm
Rotation Direction: Clounter-clockwise
Size:50x50x20mm
Size:20g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
9. 75mm x 30mm 7530 12V Dual Ball Bearing DC Brushless Cooling Blower Fan AV-F7530MB UL CE
Feature
- Package Content : 1 x DC Brushless Cooling Blower Fan
- Rated Voltage: DC 12V, Current: 0.15A
- Bearing Type: Dual Ball Bearing, Speed: 3000 RPM, Air Flow: 9.40CFM
- Connector: 2 Terminal Connector with 2pin-ph2.5, Lead Wire Length: 250mm/24AWG.
- Life Expectance: 50000 hours at 25 degree, Noise: 28.35dB(A).
- UL CE approved certification. Waranty: 1 year and lifetime support.
Description
Description:
Model: AV-F7530MB
Name: 12V DC BRUSHLESS BLOWER FAN
Rated Voltage : 12V DC
Operation Voltage: DC 6.8-12.8V
Rated Current : 0.15A
Connector: 2pin-ph2.5
Rated Speed: 3000 R.P.M.
Max. Air Flow: 9.40CFM
Life Expectance: 50,000 hours at rated voltage and normal temperature and humidity
Insulation Level: UL Class A
Certificate: CE,UL
Acoustic Noise: 28.35dB***
DC Line Length :240mm
Rotation Direction: Counter-clockwise
Size: 75x75x30mm
Weight: 75g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
*While the fan is running, please do not lock the fan intentionally for a long period of time, the action will lead over-load and over-heat, will damage the fan, even burn the wire.
10. ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)
Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
Conclusion
By our suggestions above, we hope that you can found 12V Dc Brushless Blower Cooling Fan 50X50x15mm for you.Please don’t forget to share your experience by comment in this post. Thank you!
