Finding your suitable readers for 10 w heat sink cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 10 w heat sink cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.
661 reviews analysed
1. Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver by Nabob Deals with Bonus Tool
- Arctic Silver 5 contains over 88% thermally conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles.
- Its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance and stability
- Bonus Tool will come in handy rather then getting your hands dirty
- 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core
- Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003″ thick, the 3.5 gram syringe will cover approximately 16 square inches.
2. Arctic MX-4 – Thermal Compound Paste for Coolers | Heat Sink Paste | Composed of Carbon Micro-Particles | Easy to Apply | High Durability – 4 Grams (1 Pack)
- [BETTER THAN LIQUID METAL]: Composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated efficiently.
- [SAFE APPLICATION]: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards.
- [HIGH DURABILITY]: In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years.
- [EASY TO APPLY]: With an ideal consistency, the MX-4 is very easy to use, even for beginners.
- [THERMAL COMPOUND]: Formula, the MX-4 guarantees exceptional heat dissipation from the components and supports the stability needed to push your system to its limit.
Thermal Compound for All CoolersEasy to ApplyWith an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.Safe Application:It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.High Durability :In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years. Value for MoneyA high performance thermal compound perfect for system builders, there’s no suprise that the MX-4 exceeds your expectations for its low price tag. Thermal Conductivity 8.5 W/(mK) Viscosity 870 poise Density 2.50 g/cm³ Volume Resistivity 3.8 x 1013 Ω-cm
3. Gump’s grocery 10PCS Radiating Fan 20x20x10mm Black Slot Routing CPU Cooling Fin Heat Sink
10PCS* 20x20x10mm Radiating Fin Black Slot Routing CPU Cooling Fin Heat Sink
4. ANVISION 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)
Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
5. BAY Direct Heatsink Cooling fan for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan 5V DAHUA Fan with 2 Wire 2 Pin
1 * DaHua DVR HDCVI Camera Fan
1 * Warranty Card
6. Northbear Thermoelectric Peltier Refrigeration Cooling Cooler Fan System Heatsink Kit Cooler (2 Fan)
- This module installation is assembled and you do not need to use your hands
- Cooling power: 72W
- Power: 12VDC 6A (not include in this Kit)
- Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques
- Tips: cold end frost require ambient temperature is low, is not what the environment can be frost, frost general ambient temperature below 25 degrees
- A medium sized humidor basically for seasoning. With a temp controller, this keeps the inside of the humidor
Product Name: Thermoelectric Peltier Refrigeration Cooling System Kit Cooler
Power: 12VDC 6A (not include in this Kit)
Main color: silver
7. Noctua NH-L9i, Premium Low-profile CPU Cooler for Intel LGA115x (Brown)
- Due to the slim 23mm heat sink and the NF-A9x14 low profile fan that measures only 14mm in thickness, the NH-L9 stands a mere 37mm tall, which makes it ideal for use in compact HTPCs or Small Form Factor cases that offer minimum clearance for CPU coolers.. Air flow – 33.8 CFM. Noise level – 23.6 decibels
- The NH-L9i has a 95x95mm footprint that complies exactly to the Intel LGA115x socket keep-out zone. This means that it won’t cause issues with chipset coolers and doesn’t overhang the RAM slots, so it’s fully compatible with tall memory modules.
- Most Intel LGA115x based mini-ITX mainboards have the PCIe slot sitting right next to 95x95mm socket zone. While larger coolers that exceed this zone are likely to block the PCIe slot, the 95x95xmm sized NH-L9i provides full compatibility with PCIe cards.
- The highly optimized NF-A9x14 premium fan features Noctua’s proprietary AAO frame as well as sophisticated aerodynamic design measures. Supporting PWM for fully automatic speed control, the NF-A9x14 allows the NH-L9i to stay remarkably quiet.
- Allowing to reduce the maximum speed of the NF-A9x14 fan from 2500 to 1800rpm, the included Low-Noise Adaptor (L.N.A.) makes it possible to achieve near-silent setups using CPUs with less than 65W TDP.
- The NH-L9i bundles a custom-designed, back plate-less SecuFirm2 mounting system for LGA115x that offers extended compatibility with mini-ITX boards and makes installation easier than ever, all while maintaining the trusted SecuFirm2 quality.
- Noctua’s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability.
8. ID-COOLING ZF-12025-PINK Pink Addressable RGB Case Fan, 3pin 5V ARGB MB Sync, for Case Fan/Radiator Fan
ID-COOLING ZF-12025-PINK Pink Addressable RGB Case Fan, 3pin 5V ARGB MB Sync, For Case Fan / Radiator Fan
Fan Dimension: 120×120×25mm
Fan Speed: 900~2000±10%RPM (PWM)
Max. Air Flow: 55.2CFM
Max. Static Pressure: 2.13mmH2O
Rated Voltage: 12VDC
Operating Voltage: 10.8~13.2VDC
Started Voltage: 7VDC
Rated Current: 0.25A
Power Input: 3W
Bearing Type: Hydraulic Bearing
1 x ZF-12025-PINK case fan
4 x Case panel mounting screws
4 x Radiator mounting screws
ID-COOLING is specialized in cooling products for desktop PCs and thermal solutions for industrial applications, covering CPU Cooler, VGA Cooler, Case Fan, Server Cooler, Mini Computer Cases, etc. With over 10 years’ experience in this industry, ID-COOLING enjoys a good reputation in innovation and superior quality and service.
9. Thermaltake 7-bladed 92mm 4-Pins PWM Aluminum Extrusion CPU Cooling Fan for Intel Core i7/i5/i3 CLP0556-B
Thermaltake 7-bladed 92mm 4-Pins PWM Aluminum Extrusion CPU Cooling Fan for Intel Core i7/i5/i3 CLP0556-B
Gravity i2 is a simple low-profile CPU cooler with a compact size 92mm fan in 7-bladed design; aluminum extrusion heatsink can dissipate heat up to 95W. Optimized solution for low power processors. Gravity i2 supports Intel Socket LGA 1150/1155/1156.
Compatibility: Intel LGA 1156/1155/1150/1151
Heatsink Material: Aluminum
Fan Dimension: ∅92 x 25 mm
Fan Speed: 1800 RPM
Rated Voltage: 12 V
Start Voltage: 6 V
Rated Current: 0.12 A
Power Input: 1.44 W
Air Flow: 31.343 CFM
Air Pressure: 1.484 MM-H2O
Noise: 21.3 dBa
Life time/Fan Life time: 40,000 hours
pin connect: 3 pin
Cooling Power: 95 W
Heatsink Dimension: 63 H * 95.8 W * 95.8 L mm
Weight: 320 g
10. WINSINN 40mm Fan 12V Dual Ball Bearing Brushless 4020 40x20mm Cooling – High Speed (Pack of 4Pcs)
- ✔️️Dual ball bearings 4020 Fan – High Speed version
- ✔️High quality Dual ball bearings, More stable and Long life, suitable for continuous work. Use time can 24 hours / day. The life expectancy is about 60,000 hours. No maintenance required. But Lubricating oil can further reduce noise.
- ✔️️Rated voltage: DC 12V
- ✔️️Size: 40x40x20mm
- ✔️️Made by WINSINN
By our suggestions above, we hope that you can found 10 W Heat Sink Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!